target/linux/mediatek/image/mt7622.mk

   1 DTS_DIR := $(DTS_DIR)/mediatek
   2
   3 DEVICE_VARS += BUFFALO_TRX_MAGIC
   4
   5 define Image/Prepare
   6         # For UBI we want only one extra block
   7         rm -f $(KDIR)/ubi_mark
   8         echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
   9 endef
  10
  11 define Build/buffalo-trx
  12         $(eval magic=$(word 1,$(1)))
  13         $(eval kern_bin=$(if $(1),$(IMAGE_KERNEL),$@))
  14         $(eval rtfs_bin=$(word 2,$(1)))
  15         $(eval apnd_bin=$(word 3,$(1)))
  16         $(eval kern_size=$(if $(KERNEL_SIZE),$(KERNEL_SIZE),0x400000))
  17
  18         $(if $(rtfs_bin),touch $(rtfs_bin))
  19         $(STAGING_DIR_HOST)/bin/otrx create $@.new \
  20                 $(if $(magic),-M $(magic),) \
  21                 -f $(kern_bin) \
  22                 $(if $(rtfs_bin),\
  23                         -a 0x20000 \
  24                         -b $$(( $(call exp_units,$(kern_size)) )) \
  25                         -f $(rtfs_bin),) \
  26                 $(if $(apnd_bin),\
  27                         -A $(apnd_bin) \
  28                         -a 0x20000)
  29         mv $@.new $@
  30 endef
  31
  32 define Build/bl2
  33         cat $(STAGING_DIR_IMAGE)/mt7622-$1-bl2.img >> $@
  34 endef
  35
  36 define Build/bl31-uboot
  37         cat $(STAGING_DIR_IMAGE)/mt7622_$1-u-boot.fip >> $@
  38 endef
  39
  40 # Append header to a D-Link M32/R32 Kernel 1 partition
  41 define Build/m32-r32-recovery-header-kernel1
  42         $(eval header_start=$(word 1,$(1)))
  43 # create $@.header without the checksum
  44         echo -en "$(header_start)\x00\x00" > "$@.header"
  45 # Calculate checksum over data area ($@) and append it to the header.
  46 # The checksum is the 2byte-sum over the whole data area.
  47 # Every overflow during the checksum calculation must increment the current checksum value by 1.
  48         od -v -w2 -tu2 -An --endian little "$@" | awk '{ s+=$$1; } END { s%=65535; printf "%c%c",s%256,s/256; }' >> "$@.header"
  49         echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01\x00\x8D\x57\x30\x0B" >> "$@.header"
  50 # Byte 0-3: Erase Start 0x002C0000
  51 # Byte 4-7: Erase Length 0x02D00000
  52 # Byte 8-11: Data offset: 0x002C0000
  53 # Byte 12-15: Data Length: 0x02D00000
  54         echo -en "\x00\x00\x2C\x00\x00\x00\xD0\x02\x00\x00\x2C\x00\x00\x00\xD0\x02" >> "$@.header"
  55 # Only zeros
  56         echo -en "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" >> "$@.header"
  57 # Last 16 bytes, but without checksum
  58         echo -en "\x42\x48\x02\x00\x00\x00\x08\x00\x00\x00\x00\x00\x60\x6E" >> "$@.header"
  59 # Calculate and append checksum: The checksum must be set so that the 2byte-sum of the whole header is 0.
  60 # Every overflow during the checksum calculation must increment the current checksum value by 1.
  61         od -v -w2 -tu2 -An --endian little "$@.header" | awk '{s+=65535-$$1;}END{s%=65535;printf "%c%c",s%256,s/256;}' >> "$@.header"
  62         cat "$@.header" "$@" > "$@.new"
  63         mv "$@.new" "$@"
  64         rm "$@.header"
  65 endef
  66
  67 define Build/mt7622-gpt
  68         cp $@ $@.tmp 2>/dev/null || true
  69         ptgen -g -o $@.tmp -a 1 -l 1024 \
  70                 $(if $(findstring sdmmc,$1), \
  71                         -H \
  72                         -t 0x83 -N bl2          -r      -p 512k@512k \
  73                 ) \
  74                         -t 0xef -N fip          -r      -p 2M@2M \
  75                         -t 0x83 -N ubootenv     -r      -p 1M@4M \
  76                                 -N recovery     -r      -p 32M@6M \
  77                 $(if $(findstring sdmmc,$1), \
  78                                 -N install      -r      -p 7M@38M \
  79                         -t 0x2e -N production           -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@45M \
  80                 ) \
  81                 $(if $(findstring emmc,$1), \
  82                         -t 0x2e -N production           -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@40M \
  83                 )
  84         cat $@.tmp >> $@
  85         rm $@.tmp
  86 endef
  87
  88 define Device/bananapi_bpi-r64
  89   DEVICE_VENDOR := Bananapi
  90   DEVICE_MODEL := BPi-R64
  91   DEVICE_DTS := mt7622-bananapi-bpi-r64
  92   DEVICE_DTS_OVERLAY := mt7622-bananapi-bpi-r64-pcie1 mt7622-bananapi-bpi-r64-sata
  93   DEVICE_PACKAGES := fitblk kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3 e2fsprogs mkf2fs f2fsck
  94   DEVICE_DTC_FLAGS := --pad 4096
  95   DEVICE_DTS_LOADADDR := 0x43f00000
  96   ARTIFACTS := emmc-preloader.bin emmc-bl31-uboot.fip sdcard.img.gz snand-preloader.bin snand-bl31-uboot.fip
  97   IMAGES := sysupgrade.itb
  98   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
  99   ARTIFACT/emmc-preloader.bin   := bl2 emmc-2ddr
 100   ARTIFACT/emmc-bl31-uboot.fip  := bl31-uboot bananapi_bpi-r64-emmc
 101   ARTIFACT/snand-preloader.bin  := bl2 snand-ubi-2ddr
 102   ARTIFACT/snand-bl31-uboot.fip := bl31-uboot bananapi_bpi-r64-snand
 103   ARTIFACT/sdcard.img.gz        := mt7622-gpt sdmmc |\
 104                                    pad-to 512k | bl2 sdmmc-2ddr |\
 105                                    pad-to 2048k | bl31-uboot bananapi_bpi-r64-sdmmc |\
 106                                 $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 107                                    pad-to 6144k | append-image-stage initramfs-recovery.itb | check-size 38912k |\
 108                                 ) \
 109                                    pad-to 38912k | mt7622-gpt emmc |\
 110                                    pad-to 39424k | bl2 emmc-2ddr |\
 111                                    pad-to 40960k | bl31-uboot bananapi_bpi-r64-emmc |\
 112                                    pad-to 43008k | bl2 snand-ubi-2ddr |\
 113                                    pad-to 43520k | bl31-uboot bananapi_bpi-r64-snand |\
 114                                 $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS), \
 115                                    pad-to 46080k | append-image squashfs-sysupgrade.itb | check-size |\
 116                                 ) \
 117                                   gzip
 118 ifeq ($(DUMP),)
 119   IMAGE_SIZE := $$(shell expr 45 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
 120 endif
 121   KERNEL                        := kernel-bin | gzip
 122   KERNEL_INITRAMFS              := kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb with-initrd | pad-to 128k
 123   IMAGE/sysupgrade.itb          := append-kernel | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb external-static-with-rootfs | append-metadata
 124   DEVICE_COMPAT_VERSION := 1.2
 125   DEVICE_COMPAT_MESSAGE := SPI-NAND flash layout changes require bootloader update
 126 endef
 127 TARGET_DEVICES += bananapi_bpi-r64
 128
 129 define Device/buffalo_wsr
 130   DEVICE_VENDOR := Buffalo
 131   DEVICE_DTS_DIR := ../dts
 132   KERNEL_SIZE := 6144k
 133   BLOCKSIZE := 128k
 134   PAGESIZE := 2048
 135   UBINIZE_OPTS := -E 5
 136   BUFFALO_TAG_PLATFORM := MTK
 137   BUFFALO_TAG_VERSION := 9.99
 138   BUFFALO_TAG_MINOR := 9.99
 139   IMAGES += factory.bin factory-uboot.bin
 140   KERNEL_INITRAMFS = kernel-bin | lzma | \
 141         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \
 142         buffalo-trx
 143   IMAGE/factory.bin = append-ubi | \
 144         buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark | \
 145         buffalo-enc $$(DEVICE_MODEL) $$(BUFFALO_TAG_VERSION) -l | \
 146         buffalo-tag-dhp $$(DEVICE_MODEL) JP JP | buffalo-enc-tag -l | buffalo-dhp-image
 147   IMAGE/factory-uboot.bin := append-ubi | \
 148         buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark
 149   IMAGE/sysupgrade.bin := \
 150         buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $(KDIR)/tmp/$$(DEVICE_NAME).null | \
 151         sysupgrade-tar kernel=$$$$@ | append-metadata
 152 endef
 153
 154 define Device/buffalo_wsr-2533dhp2
 155   $(Device/buffalo_wsr)
 156   DEVICE_MODEL := WSR-2533DHP2
 157   DEVICE_DTS := mt7622-buffalo-wsr-2533dhp2
 158   IMAGE_SIZE := 59392k
 159   SUBPAGESIZE := 512
 160   BUFFALO_TRX_MAGIC := 0x32504844
 161   DEVICE_PACKAGES := kmod-mt7615-firmware swconfig
 162   DEVICE_COMPAT_VERSION := 1.1
 163   DEVICE_COMPAT_MESSAGE := Partition table has been changed due to kernel size restrictions. \
 164         Please upgrade via sysupgrade with factory-uboot.bin image and '-F' option. \
 165         (Warning: your configurations will be erased!)
 166 endef
 167 TARGET_DEVICES += buffalo_wsr-2533dhp2
 168
 169 define Device/buffalo_wsr-3200ax4s
 170   $(Device/buffalo_wsr)
 171   DEVICE_MODEL := WSR-3200AX4S
 172   DEVICE_DTS := mt7622-buffalo-wsr-3200ax4s
 173   IMAGE_SIZE := 24576k
 174   BUFFALO_TRX_MAGIC := 0x33504844
 175   DEVICE_PACKAGES := kmod-mt7915-firmware
 176 endef
 177 TARGET_DEVICES += buffalo_wsr-3200ax4s
 178
 179 define Device/dlink_eagle-pro-ai-ax3200-a1
 180   IMAGE_SIZE := 46080k
 181   DEVICE_VENDOR := D-Link
 182   DEVICE_VARIANT := A1
 183   DEVICE_DTS_DIR := ../dts
 184   DEVICE_PACKAGES := kmod-mt7915-firmware
 185   KERNEL_SIZE := 8192k
 186   BLOCKSIZE := 128k
 187   PAGESIZE := 2048
 188   UBINIZE_OPTS := -E 5
 189   IMAGES += tftp.bin recovery.bin
 190   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 191   IMAGE/tftp.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size
 192 endef
 193
 194 define Device/dlink_eagle-pro-ai-m32-a1
 195   $(Device/dlink_eagle-pro-ai-ax3200-a1)
 196   DEVICE_MODEL := EAGLE PRO AI M32
 197   DEVICE_DTS := mt7622-dlink-eagle-pro-ai-m32-a1
 198   IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-r32-recovery-header-kernel1 DLK6E6010001
 199 endef
 200 TARGET_DEVICES += dlink_eagle-pro-ai-m32-a1
 201
 202 define Device/dlink_eagle-pro-ai-r32-a1
 203   $(Device/dlink_eagle-pro-ai-ax3200-a1)
 204   DEVICE_MODEL := EAGLE PRO AI R32
 205   DEVICE_DTS := mt7622-dlink-eagle-pro-ai-r32-a1
 206   IMAGE/recovery.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | pad-to $$(IMAGE_SIZE) | m32-r32-recovery-header-kernel1 DLK6E6015001
 207 endef
 208 TARGET_DEVICES += dlink_eagle-pro-ai-r32-a1
 209
 210 define Device/elecom_wrc-2533gent
 211   DEVICE_VENDOR := Elecom
 212   DEVICE_MODEL := WRC-2533GENT
 213   DEVICE_DTS := mt7622-elecom-wrc-2533gent
 214   DEVICE_DTS_DIR := ../dts
 215   DEVICE_PACKAGES := kmod-btmtkuart kmod-mt7615-firmware kmod-usb3 swconfig
 216 endef
 217 TARGET_DEVICES += elecom_wrc-2533gent
 218
 219 define Device/elecom_wrc-x3200gst3
 220   DEVICE_VENDOR := ELECOM
 221   DEVICE_MODEL := WRC-X3200GST3
 222   DEVICE_DTS := mt7622-elecom-wrc-x3200gst3
 223   DEVICE_DTS_DIR := ../dts
 224   IMAGE_SIZE := 25600k
 225   KERNEL_SIZE := 6144k
 226   BLOCKSIZE := 128k
 227   PAGESIZE := 2048
 228   UBINIZE_OPTS := -E 5
 229   IMAGES += factory.bin
 230   IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \
 231         append-ubi | check-size | \
 232         elecom-wrc-gs-factory WRC-X3200GST3 0.00 -N | \
 233         append-string MT7622_ELECOM_WRC-X3200GST3
 234   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 235   DEVICE_PACKAGES := kmod-mt7915-firmware
 236 endef
 237 TARGET_DEVICES += elecom_wrc-x3200gst3
 238
 239 define Device/linksys_e8450
 240   DEVICE_VENDOR := Linksys
 241   DEVICE_MODEL := E8450
 242   DEVICE_ALT0_VENDOR := Belkin
 243   DEVICE_ALT0_MODEL := RT3200
 244   DEVICE_DTS := mt7622-linksys-e8450
 245   DEVICE_DTS_DIR := ../dts
 246   DEVICE_PACKAGES := kmod-mt7915-firmware kmod-usb3
 247 endef
 248 TARGET_DEVICES += linksys_e8450
 249
 250 define Device/linksys_e8450-ubi
 251   DEVICE_VENDOR := Linksys
 252   DEVICE_MODEL := E8450
 253   DEVICE_VARIANT := UBI
 254   DEVICE_ALT0_VENDOR := Belkin
 255   DEVICE_ALT0_MODEL := RT3200
 256   DEVICE_ALT0_VARIANT := UBI
 257   DEVICE_DTS := mt7622-linksys-e8450-ubi
 258   DEVICE_DTS_DIR := ../dts
 259   DEVICE_PACKAGES := fitblk kmod-mt7915-firmware kmod-usb3
 260   UBINIZE_OPTS := -E 5
 261   BLOCKSIZE := 128k
 262   PAGESIZE := 2048
 263   UBOOTENV_IN_UBI := 1
 264   KERNEL_IN_UBI := 1
 265   KERNEL := kernel-bin | gzip
 266 # recovery can also be used with stock firmware web-ui, hence the padding...
 267   KERNEL_INITRAMFS := kernel-bin | lzma | \
 268         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 128k
 269   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 270   IMAGES := sysupgrade.itb
 271   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 272   ARTIFACTS := preloader.bin bl31-uboot.fip
 273   ARTIFACT/preloader.bin := bl2 snand-ubi-1ddr
 274   ARTIFACT/bl31-uboot.fip := bl31-uboot linksys_e8450
 275   DEVICE_COMPAT_VERSION := 2.0
 276   DEVICE_COMPAT_MESSAGE := SPI-NAND flash layout changes require bootloader update
 277 endef
 278 TARGET_DEVICES += linksys_e8450-ubi
 279
 280 define Device/mediatek_mt7622-rfb1
 281   DEVICE_VENDOR := MediaTek
 282   DEVICE_MODEL := MTK7622 rfb1 AP
 283   DEVICE_DTS := mt7622-rfb1
 284   DEVICE_PACKAGES := kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3
 285 endef
 286 TARGET_DEVICES += mediatek_mt7622-rfb1
 287
 288 define Device/mediatek_mt7622-rfb1-ubi
 289   DEVICE_VENDOR := MediaTek
 290   DEVICE_MODEL := MTK7622 rfb1 AP (UBI)
 291   DEVICE_DTS := mt7622-rfb1-ubi
 292   DEVICE_DTS_DIR := ../dts
 293   DEVICE_PACKAGES := kmod-ata-ahci-mtk kmod-btmtkuart kmod-usb3
 294   BOARD_NAME := mediatek,mt7622-rfb1-ubi
 295   UBINIZE_OPTS := -E 5
 296   BLOCKSIZE := 128k
 297   PAGESIZE := 2048
 298   KERNEL_SIZE := 4194304
 299   IMAGE_SIZE := 32768k
 300   IMAGES += factory.bin
 301   IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \
 302                 check-size $$$$(IMAGE_SIZE)
 303   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 304 endef
 305 # TARGET_DEVICES += mediatek_mt7622-rfb1-ubi
 306
 307 define Device/netgear_wax206
 308   $(Device/dsa-migration)
 309   DEVICE_VENDOR := NETGEAR
 310   DEVICE_MODEL := WAX206
 311   DEVICE_DTS := mt7622-netgear-wax206
 312   DEVICE_DTS_DIR := ../dts
 313   NETGEAR_ENC_MODEL := WAX206
 314   NETGEAR_ENC_REGION := US
 315   DEVICE_PACKAGES := kmod-mt7915-firmware
 316   UBINIZE_OPTS := -E 5
 317   BLOCKSIZE := 128k
 318   PAGESIZE := 2048
 319   KERNEL_SIZE := 6144k
 320   IMAGE_SIZE := 32768k
 321   KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb | \
 322         append-squashfs4-fakeroot
 323 # recovery can also be used with stock firmware web-ui, hence the padding...
 324   KERNEL_INITRAMFS := kernel-bin | lzma | \
 325         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 128k
 326   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 327   IMAGES += factory.img
 328   IMAGE/factory.img := append-kernel | pad-to $$(KERNEL_SIZE) | \
 329         append-ubi | check-size | netgear-encrypted-factory
 330   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 331 endef
 332 TARGET_DEVICES += netgear_wax206
 333
 334 define Device/ruijie_rg-ew3200gx-pro
 335   DEVICE_VENDOR := Ruijie
 336   DEVICE_MODEL := RG-EW3200GX PRO
 337   DEVICE_DTS := mt7622-ruijie-rg-ew3200gx-pro
 338   DEVICE_DTS_DIR := ../dts
 339   DEVICE_PACKAGES := kmod-mt7915-firmware
 340 endef
 341 TARGET_DEVICES += ruijie_rg-ew3200gx-pro
 342
 343 define Device/reyee_ax3200-e5
 344   DEVICE_VENDOR := reyee
 345   DEVICE_MODEL := AX3200 E5
 346   DEVICE_DTS := mt7622-reyee-ax3200-e5
 347   DEVICE_DTS_DIR := ../dts
 348   DEVICE_PACKAGES := kmod-mt7915-firmware
 349 endef
 350 TARGET_DEVICES += reyee_ax3200-e5
 351
 352 define Device/totolink_a8000ru
 353   DEVICE_VENDOR := TOTOLINK
 354   DEVICE_MODEL := A8000RU
 355   DEVICE_DTS := mt7622-totolink-a8000ru
 356   DEVICE_DTS_DIR := ../dts
 357   DEVICE_PACKAGES := kmod-mt7615-firmware kmod-usb3 swconfig
 358   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 359 endef
 360 TARGET_DEVICES += totolink_a8000ru
 361
 362 define Device/ubnt_unifi-6-lr-v1
 363   DEVICE_VENDOR := Ubiquiti
 364   DEVICE_MODEL := UniFi 6 LR
 365   DEVICE_VARIANT := v1
 366   DEVICE_DTS_CONFIG := config@1
 367   DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v1
 368   DEVICE_DTS_DIR := ../dts
 369   DEVICE_PACKAGES := kmod-mt7915-firmware kmod-leds-ubnt-ledbar
 370   SUPPORTED_DEVICES += ubnt,unifi-6-lr
 371 endef
 372 TARGET_DEVICES += ubnt_unifi-6-lr-v1
 373
 374 define Device/ubnt_unifi-6-lr-v1-ubootmod
 375   DEVICE_VENDOR := Ubiquiti
 376   DEVICE_MODEL := UniFi 6 LR
 377   DEVICE_VARIANT := v1 U-Boot mod
 378   DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v1-ubootmod
 379   DEVICE_DTS_DIR := ../dts
 380   DEVICE_PACKAGES := fitblk kmod-mt7915-firmware kmod-leds-ubnt-ledbar
 381   KERNEL := kernel-bin | lzma
 382   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 383   KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 384   IMAGES := sysupgrade.itb
 385   IMAGE/sysupgrade.itb := append-kernel | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
 386   ARTIFACTS := preloader.bin bl31-uboot.fip
 387   ARTIFACT/preloader.bin := bl2 nor-2ddr
 388   ARTIFACT/bl31-uboot.fip := bl31-uboot ubnt_unifi-6-lr-v1
 389   SUPPORTED_DEVICES += ubnt,unifi-6-lr-ubootmod
 390 endef
 391 TARGET_DEVICES += ubnt_unifi-6-lr-v1-ubootmod
 392
 393 define Device/ubnt_unifi-6-lr-v2
 394   DEVICE_VENDOR := Ubiquiti
 395   DEVICE_MODEL := UniFi 6 LR
 396   DEVICE_VARIANT := v2
 397   DEVICE_DTS_CONFIG := config@1
 398   DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v2
 399   DEVICE_DTS_DIR := ../dts
 400   DEVICE_PACKAGES := kmod-mt7915-firmware
 401 endef
 402 TARGET_DEVICES += ubnt_unifi-6-lr-v2
 403
 404 define Device/ubnt_unifi-6-lr-v2-ubootmod
 405   DEVICE_VENDOR := Ubiquiti
 406   DEVICE_MODEL := UniFi 6 LR
 407   DEVICE_VARIANT := v2 U-Boot mod
 408   DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v2-ubootmod
 409   DEVICE_DTS_DIR := ../dts
 410   DEVICE_PACKAGES := fitblk kmod-mt7915-firmware
 411   KERNEL := kernel-bin | lzma
 412   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 413   KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 414   IMAGES := sysupgrade.itb
 415   IMAGE/sysupgrade.itb := append-kernel | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
 416   ARTIFACTS := preloader.bin bl31-uboot.fip
 417   ARTIFACT/preloader.bin := bl2 nor-2ddr
 418   ARTIFACT/bl31-uboot.fip := bl31-uboot ubnt_unifi-6-lr-v2
 419 endef
 420 TARGET_DEVICES += ubnt_unifi-6-lr-v2-ubootmod
 421
 422 define Device/ubnt_unifi-6-lr-v3
 423   DEVICE_VENDOR := Ubiquiti
 424   DEVICE_MODEL := UniFi 6 LR
 425   DEVICE_VARIANT := v3
 426   DEVICE_DTS_CONFIG := config@1
 427   DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v3
 428   DEVICE_DTS_DIR := ../dts
 429   DEVICE_PACKAGES := kmod-mt7915-firmware
 430 endef
 431 TARGET_DEVICES += ubnt_unifi-6-lr-v3
 432
 433 define Device/ubnt_unifi-6-lr-v3-ubootmod
 434   DEVICE_VENDOR := Ubiquiti
 435   DEVICE_MODEL := UniFi 6 LR
 436   DEVICE_VARIANT := v3 U-Boot mod
 437   DEVICE_DTS := mt7622-ubnt-unifi-6-lr-v3-ubootmod
 438   DEVICE_DTS_DIR := ../dts
 439   DEVICE_PACKAGES := fitblk kmod-mt7915-firmware
 440   KERNEL := kernel-bin | lzma
 441   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 442   KERNEL_INITRAMFS := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 443   IMAGES := sysupgrade.itb
 444   IMAGE/sysupgrade.itb := append-kernel | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
 445   ARTIFACTS := preloader.bin bl31-uboot.fip
 446   ARTIFACT/preloader.bin := bl2 nor-2ddr
 447   ARTIFACT/bl31-uboot.fip := bl31-uboot ubnt_unifi-6-lr-v3
 448 endef
 449 TARGET_DEVICES += ubnt_unifi-6-lr-v3-ubootmod
 450
 451 define Device/xiaomi_redmi-router-ax6s
 452   DEVICE_VENDOR := Xiaomi
 453   DEVICE_MODEL := Redmi Router AX6S
 454   DEVICE_ALT0_VENDOR := Xiaomi
 455   DEVICE_ALT0_MODEL := Router AX3200
 456   DEVICE_DTS := mt7622-xiaomi-redmi-router-ax6s
 457   DEVICE_DTS_DIR := ../dts
 458   BOARD_NAME := xiaomi,redmi-router-ax6s
 459   DEVICE_PACKAGES := kmod-mt7915-firmware
 460   UBINIZE_OPTS := -E 5
 461   IMAGES += factory.bin
 462   BLOCKSIZE := 128k
 463   PAGESIZE := 2048
 464   KERNEL_SIZE := 4096k
 465   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 466   IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi
 467   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 468 endef
 469 # TARGET_DEVICES += xiaomi_redmi-router-ax6s