target/linux/mediatek/patches-5.4/0005-dts-mt7629-add-gsw.patch

   1 --- a/arch/arm/boot/dts/mt7629-rfb.dts  2020-01-15 19:54:43.784316313 +0800
   2 +++ b/arch/arm/boot/dts/mt7629-rfb.dts  2020-01-15 20:00:20.994843001 +0800
   3 @@ -18,6 +18,7 @@
   4
   5         chosen {
   6                 stdout-path = "serial0:115200n8";
   7 +               bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8";
   8         };
   9
  10         gpio-keys {
  11 @@ -36,6 +37,13 @@
  12                 };
  13         };
  14
  15 +       gsw: gsw@0 {
  16 +               compatible = "mediatek,mt753x";
  17 +               mediatek,ethsys = <&ethsys>;
  18 +               #address-cells = <1>;
  19 +               #size-cells = <0>;
  20 +        };
  21 +
  22         memory@40000000 {
  23                 device_type = "memory";
  24                 reg = <0x40000000 0x10000000>;
  25 @@ -69,6 +77,7 @@
  26         gmac0: mac@0 {
  27                 compatible = "mediatek,eth-mac";
  28                 reg = <0>;
  29 +               mtd-mac-address = <&factory 0x2a>;
  30                 phy-mode = "2500base-x";
  31                 fixed-link {
  32                         speed = <2500>;
  33 @@ -80,6 +89,7 @@
  34         gmac1: mac@1 {
  35                 compatible = "mediatek,eth-mac";
  36                 reg = <1>;
  37 +               mtd-mac-address = <&factory 0x24>;
  38                 phy-mode = "gmii";
  39                 phy-handle = <&phy0>;
  40         };
  41 @@ -93,6 +103,26 @@
  42                 };
  43         };
  44  };
  45 +
  46 +&gsw {
  47 +       mediatek,mdio = <&mdio>;
  48 +       mediatek,portmap = "llllw";
  49 +       mediatek,mdio_master_pinmux = <0>;
  50 +       reset-gpios = <&pio 28 0>;
  51 +       interrupt-parent = <&pio>;
  52 +       interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
  53 +       status = "okay";
  54 +
  55 +       port6: port@6 {
  56 +               compatible = "mediatek,mt753x-port";
  57 +               reg = <6>;
  58 +               phy-mode = "sgmii";
  59 +               fixed-link {
  60 +                       speed = <2500>;
  61 +                       full-duplex;
  62 +               };
  63 +       };
  64 +};
  65
  66  &i2c {
  67         pinctrl-names = "default";