target/linux/ramips/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2
   3 . /etc/functions.sh
   4 . /lib/ramips.sh
   5 . /lib/functions/uci-defaults.sh
   6
   7 if [ ! -x /usr/sbin/maccalc ]; then
   8         echo "$0: maccalc not found!"
   9         return
  10 fi
  11
  12 ramips_setup_interfaces()
  13 {
  14         local board="$1"
  15
  16         ucidef_set_interface_loopback
  17
  18         case $board in
  19         argus-atp52b | \
  20         b2c | \
  21         f5d8235-v2 | \
  22         nw718)
  23                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  24                 ;;
  25
  26         wl-351)
  27                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  28                 ucidef_add_switch "rtl8366rb" "1" "1"
  29                 ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
  30                 ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
  31                 ;;
  32
  33         rt-n15)
  34                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  35                 ucidef_add_switch "rtl8366s" "1" "1"
  36                 ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
  37                 ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
  38                 ;;
  39
  40         *)
  41                 RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
  42                 if [ -n "${RT3X5X}" ]; then
  43                         ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  44                 else
  45                         ucidef_set_interfaces_lan_wan "eth0" "eth1"
  46                 fi
  47                 ;;
  48         esac
  49 }
  50
  51 ramips_setup_macs()
  52 {
  53         local board="$1"
  54         local lan_mac=""
  55         local wan_mac=""
  56
  57         case $board in
  58         f5d8235-v2)
  59                 lan_mac=$(ramips_get_mac_nvram "u-boot" 262148)
  60                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  61                 ;;
  62
  63         argus-atp52b | \
  64         b2c | \
  65         nw718 | \
  66         rt-n15 | \
  67         wl-351)
  68                 lan_mac=$(ramips_get_mac_binary factory 4)
  69                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  70                 ;;
  71
  72         dir-300-b1 |\
  73         dir-300-b2 |\
  74         dir-600-b1)
  75                 lan_mac=$(ramips_get_mac_binary devdata 16388)
  76                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  77                 ;;
  78
  79         esr-9753 | \
  80         nbg-419n)
  81                 lan_mac=$(ramips_get_mac_binary factory 4)
  82                 wan_mac=$(ramips_get_mac_binary factory 40)
  83                 ;;
  84         esac
  85
  86         [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
  87         [ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
  88 }
  89
  90 [ -e /etc/config/network ] && exit 0
  91
  92 touch /etc/config/network
  93
  94 board=$(ramips_board_name)
  95
  96 ramips_setup_interfaces $board
  97 ramips_setup_macs $board
  98
  99 uci commit network
 100
 101 exit 0