target/linux/ramips/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2
   3 . /etc/functions.sh
   4 . /lib/ramips.sh
   5 . /lib/functions/uci-defaults.sh
   6
   7 if [ ! -x /usr/sbin/maccalc ]; then
   8         echo "$0: maccalc not found!"
   9         return
  10 fi
  11
  12 ramips_setup_interfaces()
  13 {
  14         local board="$1"
  15
  16         ucidef_set_interface_loopback
  17
  18         case $board in
  19         all0256n | \
  20         wl-330n)
  21                 ucidef_set_interface_lan "eth0.1"
  22                 ;;
  23
  24         argus-atp52b | \
  25         b2c | \
  26         nw718 | \
  27         sl-r7205 | \
  28         w502u | \
  29         wr6202)
  30                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  31                 ;;
  32
  33         f5d8235-v1 | \
  34         f5d8235-v2 | \
  35         v11st-fe)
  36                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  37                 ucidef_add_switch "switch0" "1" "1"
  38                 ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
  39                 ucidef_add_switch_vlan "switch0" "2" "0 5t"
  40                 ;;
  41
  42         rt-n15 | \
  43         wl-351)
  44                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  45                 ucidef_add_switch "switch0" "1" "1"
  46                 ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
  47                 ucidef_add_switch_vlan "switch0" "2" "4 5t"
  48                 ;;
  49
  50         rt-n56u)
  51                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  52                 ucidef_add_switch "switch0" "1" "1"
  53                 ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
  54                 ucidef_add_switch_vlan "switch0" "2" "4 8t"
  55                 ;;
  56
  57         wcr-150gn)
  58                 ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
  59                 ;;
  60
  61         wli-tx4-ag300n)
  62                 ucidef_set_interface_lan "eth0"
  63                 ;;
  64
  65         *)
  66                 RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
  67                 if [ -n "${RT3X5X}" ]; then
  68                         ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  69                 else
  70                         ucidef_set_interfaces_lan_wan "eth0" "eth1"
  71                 fi
  72                 ;;
  73         esac
  74 }
  75
  76 ramips_setup_macs()
  77 {
  78         local board="$1"
  79         local lan_mac=""
  80         local wan_mac=""
  81
  82         case $board in
  83         all0256n)
  84                 lan_mac=$(ramips_get_mac_binary factory 40)
  85                 ;;
  86
  87         argus-atp52b | \
  88         b2c | \
  89         f5d8235-v1 | \
  90         nw718 | \
  91         rt-n15 | \
  92         sl-r7205 | \
  93         wl-351)
  94                 lan_mac=$(ramips_get_mac_binary factory 4)
  95                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  96                 ;;
  97
  98         dir-300-b1 |\
  99         dir-300-b2 |\
 100         dir-600-b1)
 101                 lan_mac=$(ramips_get_mac_binary devdata 16388)
 102                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 103                 ;;
 104
 105         esr-9753 | \
 106         nbg-419n | \
 107         wcr-150gn)
 108                 lan_mac=$(ramips_get_mac_binary factory 4)
 109                 wan_mac=$(ramips_get_mac_binary factory 40)
 110                 ;;
 111
 112         f5d8235-v2)
 113                 lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
 114                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 115                 ;;
 116
 117         rt-n56u)
 118                 lan_mac=$(ramips_get_mac_binary factory 4)
 119                 wan_mac=$(ramips_get_mac_binary factory 32772)
 120                 ;;
 121
 122         w502u)
 123                 lan_mac=$(ramips_get_mac_binary factory 40)
 124                 wan_mac=$(ramips_get_mac_binary factory 46)
 125                 ;;
 126
 127         wl341v3)
 128                 lan_mac=$(ramips_get_mac_binary board-nvram 65440)
 129                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 130                 ;;
 131
 132         wli-tx4-ag300n)
 133                 lan_mac=$(ramips_get_mac_binary factory 4)
 134                 ;;
 135
 136         esac
 137
 138         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
 139         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
 140 }
 141
 142 [ -e /etc/config/network ] && exit 0
 143
 144 touch /etc/config/network
 145
 146 board=$(ramips_board_name)
 147
 148 ramips_setup_interfaces $board
 149 ramips_setup_macs $board
 150
 151 uci commit network
 152
 153 exit 0