target/linux/ramips/dts/AR670W.dts

   1 /dts-v1/;
   2
   3 /include/ "rt2880.dtsi"
   4
   5 / {
   6         compatible = "AR670W", "ralink,rt2880-soc";
   7         model = "Airlink101 AR670W";
   8
   9         palmbus@300000 {
  10                 gpio0: gpio@600 {
  11                         status = "okay";
  12                 };
  13         };
  14
  15         pinctrl {
  16                 state_default: pinctrl0 {
  17                         gpio {
  18                                 ralink,group = "i2c", "spi", "uartlite";
  19                                 ralink,function = "gpio";
  20                         };
  21                 };
  22         };
  23
  24         ethernet@400000 {
  25                 status = "okay";
  26                 mtd-mac-address = <&factory 0x2004>;
  27
  28                 port@0 {
  29                         phy-handle = <&phy0>;
  30                         phy-mode = "mii";
  31                 };
  32
  33                 mdio-bus {
  34                         status = "okay";
  35                         phy0: ethernet-phy@0 {
  36                                 phy-mode = "mii";
  37                                 reg = <0>;
  38                         };
  39                 };
  40         };
  41
  42         wmac@480000 {
  43                 status = "okay";
  44                 ralink,mtd-eeprom = <&factory 0x2000>;
  45         };
  46
  47         cfi@bdc00000 {
  48                 compatible = "cfi-flash";
  49                 reg = <0xbc400000 0x800000>;
  50
  51                 bank-width = <2>;
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54
  55                 u-boot@0 {
  56                         reg = <0x0 0x30000>;
  57                         label = "u-boot";
  58                         read-only;
  59                 };
  60
  61                 factory: factory@30000 {
  62                         reg = <0x30000 0x10000>;
  63                         label = "factory";
  64                         read-only;
  65                 };
  66
  67                 firmware@40000 {
  68                         reg = <0x40000 0x3c0000>;
  69                         label = "firmware";
  70                 };
  71         };
  72
  73         gpio-leds {
  74                 compatible = "gpio-leds";
  75
  76                 status {
  77                         label = "ar670w:green:power";
  78                         gpios = <&gpio0 7 1>;
  79                 };
  80
  81                 wpsblue {
  82                         label = "ar670w:blue:wps";
  83                         gpios = <&gpio0 13 1>;
  84                 };
  85         };
  86
  87         gpio-keys-polled {
  88                 compatible = "gpio-keys-polled";
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91                 poll-interval = <100>;
  92                 wps {
  93                         label = "wps";
  94                         gpios = <&gpio0 0 1>;
  95                         linux,code = <0x211>;
  96                 };
  97                 reset {
  98                         label = "reset";
  99                         gpios = <&gpio0 9 1>;
 100                         linux,code = <0x198>;
 101                 };
 102         };
 103 };