target/linux/ramips/dts/AR725W.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "AR725W", "ralink,rt2880-soc";
   9         model = "Airlink101 AR725W";
  10
  11         cfi@bdc00000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0xbc400000 0x800000>;
  14                 bank-width = <2>;
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17
  18                 u-boot@0 {
  19                         reg = <0x0 0x30000>;
  20                         label = "u-boot";
  21                         read-only;
  22                 };
  23
  24                 u-boot-env@30000 {
  25                         reg = <0x30000 0x10000>;
  26                         label = "u-boot-env";
  27                 };
  28
  29                 factory: factory@40000 {
  30                         reg = <0x40000 0x10000>;
  31                         label = "factory";
  32                         read-only;
  33                 };
  34
  35                 firmware@50000 {
  36                         reg = <0x50000 0x3B0000>;
  37                         label = "firmware";
  38                 };
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43
  44                 status {
  45                         label = "ar725w:green:power";
  46                         gpios = <&gpio0 7 0>;
  47                 };
  48
  49                 wpsred {
  50                         label = "ar725w:red:wps";
  51                         gpios = <&gpio0 8 1>;
  52                 };
  53
  54                 wpsblue {
  55                         label = "ar725w:blue:wps";
  56                         gpios = <&gpio0 13 1>;
  57                 };
  58         };
  59
  60         gpio-keys-polled {
  61                 compatible = "gpio-keys-polled";
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64                 poll-interval = <100>;
  65
  66                 wps {
  67                         label = "wps";
  68                         gpios = <&gpio0 0 1>;
  69                         linux,code = <KEY_WPS_BUTTON>;
  70                 };
  71
  72                 reset {
  73                         label = "reset";
  74                         gpios = <&gpio0 9 1>;
  75                         linux,code = <KEY_RESTART>;
  76                 };
  77         };
  78 };
  79
  80 &gpio0 {
  81         status = "okay";
  82 };
  83
  84 &pinctrl {
  85         state_default: pinctrl0 {
  86                 gpio {
  87                         ralink,group = "i2c", "spi", "uartlite";
  88                         ralink,function = "gpio";
  89                 };
  90         };
  91 };
  92
  93 &ethernet {
  94         status = "okay";
  95         mtd-mac-address = <&factory 0x4>;
  96
  97         port@0 {
  98                 phy-handle = <&phy0>;
  99                 phy-mode = "mii";
 100         };
 101
 102         mdio-bus {
 103                 status = "okay";
 104
 105                 phy0: ethernet-phy@0 {
 106                         phy-mode = "mii";
 107                         reg = <0>;
 108                 };
 109         };
 110 };
 111
 112 &wmac {
 113         status = "okay";
 114         ralink,mtd-eeprom = <&factory 0>;
 115 };