3 #include "mt7620a.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "tplink,c2-v1", "ralink,mt7620a-soc";
10 model = "TP-Link Archer C2 v1";
14 led-failsafe = &led_wps;
15 led-running = &led_wps;
16 led-upgrade = &led_wps;
20 bootargs = "console=ttyS0,115200";
24 state_default: pinctrl0 {
26 ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
27 ralink,function = "gpio";
33 compatible = "gpio-leds";
36 label = "c2-v1:green:lan";
37 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
41 label = "c2-v1:green:usb";
42 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
43 trigger-sources = <&ohci_port1>, <&ehci_port1>;
44 linux,default-trigger = "usbport";
48 label = "c2-v1:green:wps";
49 gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
53 label = "c2-v1:green:wan";
54 gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
58 label = "c2-v1:green:wlan";
59 gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
60 linux,default-trigger = "phy1tpt";
65 compatible = "gpio-keys";
69 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
70 linux,code = <KEY_RESTART>;
75 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
76 linux,code = <KEY_RFKILL>;
81 compatible = "realtek,rtl8367b", "rtl8367b";
83 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
92 compatible = "jedec,spi-nor";
94 spi-max-frequency = <10000000>;
97 compatible = "fixed-partitions";
108 compatible = "tplink,firmware";
110 reg = <0x20000 0x7a0000>;
115 reg = <0x7c0000 0x10000>;
119 rom: partition@7d0000 {
121 reg = <0x7d0000 0x10000>;
127 reg = <0x7e0000 0x10000>;
131 radio: partition@7f0000 {
133 reg = <0x7f0000 0x10000>;
142 mtd-mac-address = <&rom 0xf100>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
148 mediatek,fixed-link = <1000 1 1 1>;
171 ralink,mtd-eeprom = <&radio 0>;
172 mtd-mac-address = <&rom 0xf100>;
189 reg = <0x0000 0 0 0 0>;
190 mediatek,mtd-eeprom = <&radio 0x8000>;