target/linux/ramips/dts/ArcherC2-v1.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,c2-v1", "ralink,mt7620a-soc";
  10         model = "TP-Link Archer C2 v1";
  11
  12         aliases {
  13                 led-status = &led_wps;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         pinctrl {
  21                 state_default: pinctrl0 {
  22                         gpio {
  23                                 ralink,group = "i2c", "uartf", "wled", "ephy", "spi refclk";
  24                                 ralink,function = "gpio";
  25                         };
  26                 };
  27         };
  28
  29         gpio-leds {
  30                 compatible = "gpio-leds";
  31
  32                 lan {
  33                         label = "c2-v1:green:lan";
  34                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 usb {
  38                         label = "c2-v1:green:usb";
  39                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 led_wps: wps {
  43                         label = "c2-v1:green:wps";
  44                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 wan {
  48                         label = "c2-v1:green:wan";
  49                         gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wlan {
  53                         label = "c2-v1:green:wlan";
  54                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57
  58         gpio-keys {
  59                 compatible = "gpio-keys";
  60
  61                 reset_wps {
  62                         label = "reset_wps";
  63                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  64                         linux,code = <KEY_RESTART>;
  65                 };
  66
  67                 rfkill {
  68                         label = "rfkill";
  69                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  70                         linux,code = <KEY_RFKILL>;
  71                 };
  72         };
  73
  74         rtl8367rb {
  75                 compatible = "realtek,rtl8367b", "rtl8367b";
  76                 cpu_port = <6>;
  77                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  78                 mii-bus = <&mdio0>;
  79         };
  80 };
  81
  82 &spi0 {
  83         status = "okay";
  84
  85         m25p80@0 {
  86                 #address-cells = <1>;
  87                 #size-cells = <1>;
  88                 compatible = "jedec,spi-nor";
  89                 reg = <0>;
  90                 spi-max-frequency = <10000000>;
  91
  92                 partition@0 {
  93                         label = "u-boot";
  94                         reg = <0x0 0x20000>;
  95                         read-only;
  96                 };
  97
  98                 partition@20000 {
  99                         label = "firmware";
 100                         reg = <0x20000 0x7a0000>;
 101                 };
 102
 103                 partition@7c0000 {
 104                         label = "config";
 105                         reg = <0x7c0000 0x10000>;
 106                         read-only;
 107                 };
 108
 109                 rom: partition@7d0000 {
 110                         label = "rom";
 111                         reg = <0x7d0000 0x10000>;
 112                         read-only;
 113                 };
 114
 115                 partition@7e0000 {
 116                         label = "romfile";
 117                         reg = <0x7e0000 0x10000>;
 118                         read-only;
 119                 };
 120
 121                 radio: partition@7f0000 {
 122                         label = "radio";
 123                         reg = <0x7f0000 0x10000>;
 124                         read-only;
 125                 };
 126         };
 127 };
 128
 129 &ethernet {
 130         status = "okay";
 131         mtd-mac-address = <&rom 0xf100>;
 132         pinctrl-names = "default";
 133         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
 134
 135         port@5 {
 136                 status = "okay";
 137                 mediatek,fixed-link = <1000 1 1 1>;
 138                 phy-mode = "rgmii";
 139         };
 140
 141         mdio0: mdio-bus {
 142                 status = "okay";
 143         };
 144 };
 145
 146
 147 &gpio1 {
 148         status = "okay";
 149 };
 150
 151 &gpio2 {
 152         status = "okay";
 153 };
 154
 155 &gpio3 {
 156         status = "okay";
 157 };
 158
 159 &wmac {
 160         ralink,mtd-eeprom = <&radio 0>;
 161         mtd-mac-address = <&rom 0xf100>;
 162 };
 163
 164 &ehci {
 165         status = "okay";
 166 };
 167
 168 &ohci {
 169         status = "okay";
 170 };
 171
 172 &pcie {
 173         status = "okay";
 174 };
 175
 176 &pcie0 {
 177         mt76@0,0 {
 178                 reg = <0x0000 0 0 0 0>;
 179                 mediatek,mtd-eeprom = <&radio 0x8000>;
 180         };
 181 };