target/linux/ramips/dts/ArcherC50V3.dts

   1 /dts-v1/;
   2
   3 #include "TPLINK-8M.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,c50-v3", "mediatek,mt7628an-soc";
  10         model = "TP-Link Archer C50 v3";
  11
  12         gpio-keys-polled {
  13                 compatible = "gpio-keys-polled";
  14                 #address-cells = <1>;
  15                 #size-cells = <0>;
  16                 poll-interval = <20>;
  17
  18                 reset {
  19                         label = "reset";
  20                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  21                         linux,code = <KEY_RESTART>;
  22                 };
  23
  24                 rfkill {
  25                         label = "rfkill";
  26                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
  27                         linux,code = <KEY_RFKILL>;
  28                 };
  29         };
  30
  31         gpio-leds {
  32                 compatible = "gpio-leds";
  33
  34                 lan {
  35                         label = "c50-v3:green:lan";
  36                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 power {
  40                         label = "c50-v3:green:power";
  41                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 wan {
  45                         label = "c50-v3:green:wan";
  46                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wan_orange {
  50                         label = "c50-v3:orange:wan";
  51                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 wlan {
  55                         label = "c50-v3:green:wlan2g";
  56                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 wlan5 {
  60                         label = "c50-v3:green:wlan5g";
  61                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 wps {
  65                         label = "c50-v3:green:wps";
  66                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69 };
  70
  71 &pinctrl {
  72         state_default: pinctrl0 {
  73                 gpio {
  74                         ralink,group = "i2c", "gpio", "p0led_an", "p1led_an", "p2led_an",
  75                                        "p3led_an", "p4led_an", "wdt", "wled_an";
  76                         ralink,function = "gpio";
  77                 };
  78         };
  79 };
  80
  81 &pcie {
  82         status = "okay";
  83
  84         pcie-bridge {
  85                 mt76@0,0 {
  86                         reg = <0x0000 0 0 0 0>;
  87                         device_type = "pci";
  88                         mediatek,mtd-eeprom = <&factory 0x28000>;
  89                         ieee80211-freq-limit = <5000000 6000000>;
  90                         mtd-mac-address = <&factory 0xf100>;
  91                         mtd-mac-address-increment = <(-1)>;
  92                 };
  93         };
  94 };