3 #include "mt7620a.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
9 compatible = "planex,cs-qr10", "ralink,mt7620a-soc";
10 model = "YUKAI Engineering BOCCO";
13 compatible = "gpio-keys-polled";
18 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
19 linux,code = <KEY_RESTART>;
24 compatible = "gpio-export";
28 gpio-export,name = "rec";
29 gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
32 gpio-export,name = "play";
33 gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
38 compatible = "simple-audio-card";
39 simple-audio-card,name = "Audio-I2S";
40 simple-audio-card,format = "i2s";
41 simple-audio-card,bitclock-master = <&dailink0_master>;
42 simple-audio-card,frame-master = <&dailink0_master>;
43 simple-audio-card,widgets =
44 "Headphone", "Headphones";
45 simple-audio-card,routing =
48 simple-audio-card,mclk-fs = <256>;
50 simple-audio-card,cpu {
54 dailink0_master: simple-audio-card,codec {
80 #sound-dai-cells = <0>;
81 compatible = "wlf,wm8960";
89 #sound-dai-cells = <0>;
91 pinctrl-names = "default";
92 pinctrl-0 = <&pcm_i2s_pins>;
101 compatible = "jedec,spi-nor";
103 spi-max-frequency = <10000000>;
112 label = "u-boot-env";
113 reg = <0x30000 0x10000>;
117 factory: partition@40000 {
119 reg = <0x40000 0x10000>;
125 reg = <0x50000 0x7b0000>;
139 state_default: pinctrl0 {
141 ralink,group = "spi refclk", "rgmii1";
142 ralink,function = "gpio";
148 pinctrl-names = "default";
149 pinctrl-0 = <&ephy_pins>;
150 mtd-mac-address = <&factory 0x4>;
151 mediatek,portmap = "llllw";
155 ralink,port4 = "ephy";
159 ralink,mtd-eeprom = <&factory 0>;