target/linux/ramips/dts/CF-WR800N.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "cf-wr800n", "ralink,mt7620n-soc";
   9         model = "Comfast CF-WR800N";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200";
  13         };
  14
  15         gpio-leds {
  16                 compatible = "gpio-leds";
  17
  18                 ethernet {
  19                         label = "cf-wr800n:white:ethernet";
  20                         gpios = <&gpio2 4 1>;
  21                 };
  22
  23                 wifi {
  24                         label = "cf-wr800n:white:wifi";
  25                         gpios = <&gpio3 0 1>;
  26                 };
  27
  28                 wps {
  29                         label = "cf-wr800n:white:wps";
  30                         gpios = <&gpio1 15 1>;
  31                 };
  32         };
  33
  34         gpio-keys-polled {
  35                 compatible = "gpio-keys-polled";
  36                 #address-cells = <1>;
  37                 #size-cells = <0>;
  38                 poll-interval = <20>;
  39
  40                 reset {
  41                         label = "reset";
  42                         gpios = <&gpio0 2 1>;
  43                         linux,code = <KEY_RESTART>;
  44                 };
  45         };
  46 };
  47
  48 &gpio0 {
  49         status = "okay";
  50 };
  51
  52 &gpio1 {
  53         status = "okay";
  54 };
  55
  56 &gpio2 {
  57         status = "okay";
  58 };
  59
  60 &gpio3 {
  61         status = "okay";
  62 };
  63
  64 &spi0 {
  65         status = "okay";
  66
  67         m25p80@0 {
  68                 #address-cells = <1>;
  69                 #size-cells = <1>;
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <10000000>;
  73
  74                 partition@0 {
  75                         label = "u-boot";
  76                         reg = <0x0 0x30000>;
  77                         read-only;
  78                 };
  79
  80                 partition@30000 {
  81                         label = "u-boot-env";
  82                         reg = <0x30000 0x10000>;
  83                         read-only;
  84                 };
  85
  86                 factory: partition@40000 {
  87                         label = "factory";
  88                         reg = <0x40000 0x10000>;
  89                         read-only;
  90                 };
  91
  92                 partition@50000 {
  93                         label = "firmware";
  94                         reg = <0x50000 0x7b0000>;
  95                 };
  96         };
  97 };
  98
  99 &ethernet {
 100         mtd-mac-address = <&factory 0x4>;
 101 };
 102
 103 &wmac {
 104         ralink,mtd-eeprom = <&factory 0>;
 105 };
 106
 107 &pinctrl {
 108         state_default: pinctrl0 {
 109                 default {
 110                         ralink,group = "ephy", "wled", "spi refclk", "i2c";
 111                         ralink,function = "gpio";
 112                 };
 113         };
 114 };