target/linux/ramips/dts/DIR-610-A1.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-610-a1", "ralink,rt5350-soc";
  10         model = "D-Link DIR-610 A1";
  11
  12         aliases {
  13                 led-status = &led_status;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_status: status {
  20                         label = "dir-610-a1:green:status";
  21                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 wps {
  25                         label = "dir-610-a1:green:wps";
  26                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 poll-interval = <20>;
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_RESTART>;
  38                 };
  39
  40                 wps {
  41                         label = "wps";
  42                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_WPS_BUTTON>;
  44                 };
  45         };
  46 };
  47
  48 &spi0 {
  49         status = "okay";
  50
  51         m25p80@0 {
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 compatible = "jedec,spi-nor";
  55                 reg = <0>;
  56                 spi-max-frequency = <10000000>;
  57
  58                 partition@0 {
  59                         label = "u-boot";
  60                         reg = <0x0 0x30000>;
  61                         read-only;
  62                 };
  63
  64                 devdata: partition@30000 {
  65                         label = "devdata";
  66                         reg = <0x30000 0x10000>;
  67                         read-only;
  68                 };
  69
  70                 factory: partition@40000 {
  71                         label = "factory";
  72                         reg = <0x40000 0x10000>;
  73                         read-only;
  74                 };
  75
  76                 partition@50000 {
  77                         label = "firmware";
  78                         reg = <0x50000 0x3b0000>;
  79                 };
  80         };
  81 };
  82
  83 &pinctrl {
  84         state_default: pinctrl0 {
  85                 gpio {
  86                         ralink,group = "i2c", "jtag", "uartf";
  87                         ralink,function = "gpio";
  88                 };
  89         };
  90 };
  91
  92 &ethernet {
  93         mtd-mac-address = <&devdata 0x4004>;
  94 };
  95
  96 &esw {
  97         status = "okay";
  98         mediatek,portmap = <0x2f>;
  99         mediatek,led_polarity = <0x17>;
 100 };
 101
 102 &wmac {
 103         status = "okay";
 104         ralink,led-polarity = <1>;
 105         ralink,mtd-eeprom = <&devdata 0x4000>;
 106 };