target/linux/ramips/dts/DIR-615-H1.dts

   1 /dts-v1/;
   2
   3 #include "rt3352.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dir-615-h1", "ralink,rt3352-soc";
  10         model = "D-Link DIR-615 H1";
  11
  12         aliases {
  13                 led-status = &led_status_green;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 status {
  20                         label = "dir-615-h1:amber:status";
  21                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  22                 };
  23
  24                 led_status_green: status2 {
  25                         label = "dir-615-h1:green:status";
  26                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  27                 };
  28
  29                 wan {
  30                         label = "dir-615-h1:amber:wan";
  31                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 wan2 {
  35                         label = "dir-615-h1:green:wan";
  36                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wps {
  40                         label = "dir-615-h1:blue:wps";
  41                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         gpio-keys-polled {
  46                 compatible = "gpio-keys-polled";
  47                 poll-interval = <20>;
  48
  49                 reset {
  50                         label = "reset";
  51                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  52                         linux,code = <KEY_RESTART>;
  53                 };
  54
  55                 wps {
  56                         label = "wps";
  57                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  58                         linux,code = <KEY_WPS_BUTTON>;
  59                 };
  60         };
  61 };
  62
  63 &spi0 {
  64         status = "okay";
  65
  66         m25p80@0 {
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <10000000>;
  72
  73                 partition@0 {
  74                         label = "u-boot";
  75                         reg = <0x0 0x30000>;
  76                         read-only;
  77                 };
  78
  79                 partition@30000 {
  80                         label = "u-boot-env";
  81                         reg = <0x30000 0x10000>;
  82                         read-only;
  83                 };
  84
  85                 factory: partition@40000 {
  86                         label = "factory";
  87                         reg = <0x40000 0x10000>;
  88                         read-only;
  89                 };
  90
  91                 partition@50000 {
  92                         label = "firmware";
  93                         reg = <0x50000 0x3b0000>;
  94                 };
  95         };
  96 };
  97
  98 &pinctrl {
  99         state_default: pinctrl0 {
 100                 gpio {
 101                         ralink,group = "i2c", "jtag", "uartf";
 102                         ralink,function = "gpio";
 103                 };
 104         };
 105 };
 106
 107 &ethernet {
 108         mtd-mac-address = <&factory 0x28>;
 109         pinctrl-names = "default";
 110         pinctrl-0 = <&rgmii_pins &mdio_pins>;
 111 };
 112
 113 &esw {
 114         mediatek,portmap = <0x2f>;
 115 };
 116
 117 &wmac {
 118         ralink,mtd-eeprom = <&factory 0>;
 119 };