target/linux/ramips/dts/FONERA20N.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "FONERA20N", "ralink,rt3052-soc";
   9         model = "La Fonera 2.0N";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "u-boot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "u-boot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "firmware";
  39                         reg = <0x50000 0x7b0000>;
  40                 };
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45
  46                 wifi {
  47                         label = "fonera20n:orange:wifi";
  48                         gpios = <&gpio0 7 1>;
  49                 };
  50
  51                 power {
  52                         label = "fonera20n:green:power";
  53                         gpios = <&gpio0 9 1>;
  54                 };
  55
  56                 usb {
  57                         label = "fonera20n:orange:usb";
  58                         gpios = <&gpio0 14 1>;
  59                 };
  60         };
  61
  62         gpio-keys-polled {
  63                 compatible = "gpio-keys-polled";
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66                 poll-interval = <20>;
  67
  68                 reset {
  69                         label = "reset";
  70                         gpios = <&gpio0 12 1>;
  71                         linux,code = <KEY_RESTART>;
  72                 };
  73
  74                 switch {
  75                         label = "switch";
  76                         gpios = <&gpio0 13 1>;
  77                         linux,code = <KEY_RFKILL>;
  78                         linux,input-type = <EV_SW>;
  79                 };
  80         };
  81 };
  82
  83 &pinctrl {
  84         state_default: pinctrl0 {
  85                 gpio {
  86                         ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  87                         ralink,function = "gpio";
  88                 };
  89         };
  90 };
  91
  92 &ethernet {
  93         mtd-mac-address = <&factory 0x28>;
  94 };
  95
  96 &esw {
  97         mediatek,portmap = <0x2f>;
  98
  99         port@0 {
 100                 compatible = "swconfig,port";
 101                 swconfig,segment = "lan";
 102                 swconfig,portmap = <0 4>;
 103         };
 104
 105         port@1 {
 106                 compatible = "swconfig,port";
 107                 swconfig,segment = "lan";
 108                 swconfig,portmap = <1 3>;
 109         };
 110
 111         port@2 {
 112                 compatible = "swconfig,port";
 113                 swconfig,segment = "lan";
 114                 swconfig,portmap = <2 2>;
 115         };
 116
 117         port@3 {
 118                 compatible = "swconfig,port";
 119                 swconfig,segment = "lan";
 120                 swconfig,portmap = <3 1>;
 121         };
 122
 123         port@4 {
 124                 compatible = "swconfig,port";
 125                 swconfig,segment = "wan";
 126                 swconfig,portmap = <4 0>;
 127         };
 128 };
 129
 130 &wmac {
 131         ralink,mtd-eeprom = <&factory 0>;
 132 };
 133
 134 &otg {
 135         status = "okay";
 136 };