target/linux/ramips/dts/HC5661A.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
  10         model = "HiWiFi HC5661A";
  11
  12         aliases {
  13                 led-status = &led_system;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         memory@0 {
  21                 device_type = "memory";
  22                 reg = <0x0 0x8000000>;
  23         };
  24
  25         sdhci@10130000 {
  26                 status = "okay";
  27         };
  28
  29         gpio-leds {
  30                 compatible = "gpio-leds";
  31
  32                 led_system: system {
  33                         label = "hc5661a:blue:system";
  34                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  35                 };
  36                 internet {
  37                         label = "hc5661a:blue:internet";
  38                         gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  39                 };
  40                 wlan2g {
  41                         label = "hc5661a:blue:wlan2g";
  42                         gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
  43                 };
  44         };
  45
  46         gpio-keys {
  47                 compatible = "gpio-keys-polled";
  48                 poll-interval = <20>;
  49
  50                 reset {
  51                         label = "reset";
  52                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  53                         linux,code = <KEY_RESTART>;
  54                 };
  55         };
  56 };
  57
  58 &pinctrl {
  59         state_default: pinctrl0 {
  60                 gpio {
  61                         ralink,group = "i2c", "refclk", "wled_an";
  62                         ralink,function = "gpio";
  63                 };
  64         };
  65 };
  66
  67 &spi0 {
  68         status = "okay";
  69
  70         m25p80@0 {
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73                 compatible = "jedec,spi-nor";
  74                 reg = <0>;
  75                 linux,modalias = "m25p80", "w25q128";
  76                 spi-max-frequency = <10000000>;
  77                 m25p,chunked-io = <32>;
  78
  79                 partition@0 {
  80                         label = "u-boot";
  81                         reg = <0x0 0x30000>;
  82                         read-only;
  83                 };
  84
  85                 partition@30000 {
  86                         label = "hw_panic";
  87                         reg = <0x30000 0x10000>;
  88                         read-only;
  89                 };
  90
  91                 factory: partition@40000 {
  92                         label = "factory";
  93                         reg = <0x40000 0x10000>;
  94                         read-only;
  95                 };
  96
  97                 partition@50000 {
  98                         label = "firmware";
  99                         reg = <0x50000 0xf70000>;
 100                 };
 101
 102                 partition@fc0000 {
 103                         label = "oem";
 104                         reg = <0xfc0000 0x20000>;
 105                         read-only;
 106                 };
 107
 108                 bdinfo: partition@fe0000 {
 109                         label = "bdinfo";
 110                         reg = <0xfe0000 0x10000>;
 111                         read-only;
 112                 };
 113
 114                 partition@ff0000 {
 115                         label = "backup";
 116                         reg = <0xff0000 0x10000>;
 117                         read-only;
 118                 };
 119         };
 120 };
 121
 122 &ethernet {
 123         mtd-mac-address = <&factory 0x4>;
 124         mediatek,portmap = "wllll";
 125 };
 126
 127 &wmac {
 128         status = "okay";
 129 };