target/linux/ramips/dts/HLK-7628N.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "hilink,hlk-7628n", "mediatek,mt7628an-soc";
  11         model = "HILINK HLK-7628N";
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x8000000>;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,57600";
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys-polled";
  24                 poll-interval = <20>;
  25
  26                 reset {
  27                         label = "reset";
  28                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  29                         linux,code = <KEY_RESTART>;
  30                 };
  31         };
  32
  33         leds {
  34                 compatible = "gpio-leds";
  35
  36                 wlan {
  37                         label = "hlk-7628n:green:wlan";
  38                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  39                 };
  40         };
  41 };
  42
  43 &pinctrl {
  44         state_default: pinctrl0 {
  45                 gpio {
  46                         ralink,group = "i2c";
  47                         ralink,function = "gpio";
  48                 };
  49         };
  50 };
  51
  52 &uart1 {
  53         status = "okay";
  54 };
  55
  56 &spi0 {
  57         status = "okay";
  58
  59         flash@0 {
  60                 compatible = "jedec,spi-nor";
  61                 reg = <0>;
  62                 spi-max-frequency = <10000000>;
  63
  64                 partitions {
  65                         compatible = "fixed-partitions";
  66                         #address-cells = <1>;
  67                         #size-cells = <1>;
  68
  69                         partition@0 {
  70                                 label = "u-boot";
  71                                 reg = <0x0 0x30000>;
  72                                 read-only;
  73                         };
  74
  75                         partition@30000 {
  76                                 label = "u-boot-env";
  77                                 reg = <0x30000 0x10000>;
  78                                 read-only;
  79                         };
  80
  81                         factory: partition@40000 {
  82                                 label = "factory";
  83                                 reg = <0x40000 0x10000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@50000 {
  88                                 compatible = "denx,uimage";
  89                                 label = "firmware";
  90                                 reg = <0x50000 0x1fb0000>;
  91                         };
  92                 };
  93         };
  94 };
  95
  96 &wmac {
  97         status = "okay";
  98 };
  99