target/linux/ramips/dts/JHR-N805R.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "JHR-N805R", "ralink,rt3050-soc";
   9         model = "JCG JHR-N805R";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 system {
  15                         label = "jhr-n805r:blue:system";
  16                         gpios = <&gpio0 9 1>;
  17                 };
  18         };
  19
  20         gpio-keys-polled {
  21                 compatible = "gpio-keys-polled";
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24                 poll-interval = <20>;
  25
  26                 reset {
  27                         label = "reset";
  28                         gpios = <&gpio0 10 1>;
  29                         linux,code = <KEY_RESTART>;
  30                 };
  31         };
  32 };
  33
  34 &pinctrl {
  35         state_default: pinctrl0 {
  36                 gpio {
  37                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  38                         ralink,function = "gpio";
  39                 };
  40         };
  41 };
  42
  43 &spi0 {
  44         status = "okay";
  45
  46         m25p80@0 {
  47                 #address-cells = <1>;
  48                 #size-cells = <1>;
  49                 compatible = "jedec,spi-nor";
  50                 reg = <0>;
  51                 linux,modalias = "m25p80", "mx25l3205d";
  52                 spi-max-frequency = <10000000>;
  53
  54                 partition@0 {
  55                         label = "u-boot";
  56                         reg = <0x0 0x30000>;
  57                         read-only;
  58                 };
  59
  60                 partition@30000 {
  61                         label = "u-boot-env";
  62                         reg = <0x30000 0x10000>;
  63                         read-only;
  64                 };
  65
  66                 factory: partition@40000 {
  67                         label = "factory";
  68                         reg = <0x40000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 partition@50000 {
  73                         label = "firmware";
  74                         reg = <0x50000 0x3b0000>;
  75                 };
  76         };
  77 };
  78
  79 &ethernet {
  80         mtd-mac-address = <&factory 0x2e>;
  81 };
  82
  83 &esw {
  84         mediatek,portmap = <0x3e>;
  85 };
  86
  87 &wmac {
  88         ralink,mtd-eeprom = <&factory 0>;
  89 };