target/linux/ramips/dts/MAC1200RV2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
  10         model = "Mercury MAC1200R v2";
  11
  12         chosen {
  13                 bootargs = "console=ttyS0,57600";
  14         };
  15
  16         memory@0 {
  17                 device_type = "memory";
  18                 reg = <0x0 0x2000000>;
  19         };
  20
  21         gpio-leds {
  22                 compatible = "gpio-leds";
  23                 status {
  24                         label = "mac1200rv2:green:status";
  25                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  26                 };
  27         };
  28 };
  29
  30 &spi0 {
  31         status = "okay";
  32
  33         m25p80@0 {
  34                 #address-cells = <1>;
  35                 #size-cells = <1>;
  36                 compatible = "jedec,spi-nor";
  37                 reg = <0 0>;
  38                 spi-max-frequency = <10000000>;
  39                 m25p,chunked-io = <32>;
  40
  41                 partition@0 {
  42                         label = "u-boot";
  43                         reg = <0x0 0x1d800>;
  44                 };
  45
  46                 factory: partition@0x1d800 {
  47                         label = "factory_info";
  48                         reg = <0x1d800 0x800>;
  49                         read-only;
  50                 };
  51
  52                 art: partition@0x1e000 {
  53                         label = "art";
  54                         reg = <0x1e000 0x2000>;
  55                         read-only;
  56                 };
  57
  58                 partition@20000 {
  59                         label = "config";
  60                         reg = <0x20000 0x10000>;
  61                 };
  62
  63                 partition@30000 {
  64                         label = "u-boot2";
  65                         reg = <0x30000 0x10000>;
  66                 };
  67
  68                 partition@40000 {
  69                         label = "firmware";
  70                         reg = <0x40000 0x7c0000>;
  71                 };
  72         };
  73 };
  74
  75 &ethernet {
  76         pinctrl-names = "default";
  77         mtd-mac-address = <&factory 0xd>;
  78         mediatek,portmap = "llllw";
  79 };
  80
  81 &wmac {
  82         status = "okay";
  83         ralink,mtd-eeprom = <&art 0x0>;
  84 };
  85
  86 &pcie {
  87         status = "okay";
  88         pcie-bridge {
  89                 mt76@0,0 {
  90                         reg = <0x0000 0 0 0 0>;
  91                         device_type = "pci";
  92                         mediatek,mtd-eeprom = <&art 0x1000>;
  93                         ieee80211-freq-limit = <5000000 6000000>;
  94                 };
  95         };
  96 };