target/linux/ramips/dts/MT7620a_MT7530.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   7         model = "Ralink MT7620a + MT7530 evaluation board";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         m25p80@0 {
  14                 compatible = "jedec,spi-nor";
  15                 reg = <0>;
  16                 spi-max-frequency = <10000000>;
  17
  18                 partitions {
  19                         compatible = "fixed-partitions";
  20                         #address-cells = <1>;
  21                         #size-cells = <1>;
  22
  23                         partition@0 {
  24                                 label = "u-boot";
  25                                 reg = <0x0 0x30000>;
  26                                 read-only;
  27                         };
  28
  29                         partition@30000 {
  30                                 label = "u-boot-env";
  31                                 reg = <0x30000 0x10000>;
  32                                 read-only;
  33                         };
  34
  35                         factory: partition@40000 {
  36                                 label = "factory";
  37                                 reg = <0x40000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         partition@50000 {
  42                                 compatible = "denx,uimage";
  43                                 label = "firmware";
  44                                 reg = <0x50000 0x7b0000>;
  45                         };
  46                 };
  47         };
  48 };
  49
  50 &pinctrl {
  51         state_default: pinctrl0 {
  52                 gpio {
  53                         ralink,group = "i2c", "uartf";
  54                         ralink,function = "gpio";
  55                 };
  56         };
  57 };
  58
  59 &ethernet {
  60         status = "okay";
  61         pinctrl-names = "default";
  62         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  63         mediatek,portmap = "llllw";
  64
  65         port@5 {
  66                 status = "okay";
  67                 mediatek,fixed-link = <1000 1 1 1>;
  68                 phy-mode = "rgmii";
  69         };
  70
  71         mdio-bus {
  72                 status = "okay";
  73
  74                 phy0: ethernet-phy@0 {
  75                         reg = <0>;
  76                         phy-mode = "rgmii";
  77                 };
  78
  79                 phy1: ethernet-phy@1 {
  80                         reg = <1>;
  81                         phy-mode = "rgmii";
  82                 };
  83
  84                 phy2: ethernet-phy@2 {
  85                         reg = <2>;
  86                         phy-mode = "rgmii";
  87                 };
  88
  89                 phy3: ethernet-phy@3 {
  90                         reg = <3>;
  91                         phy-mode = "rgmii";
  92                 };
  93
  94                 phy4: ethernet-phy@4 {
  95                         reg = <4>;
  96                         phy-mode = "rgmii";
  97                 };
  98
  99                 phy1f: ethernet-phy@1f {
 100                         reg = <0x1f>;
 101                         phy-mode = "rgmii";
 102                 };
 103         };
 104 };
 105
 106 &gsw {
 107         mediatek,port4 = "gmac";
 108 };
 109
 110 &pcie {
 111         status = "okay";
 112 };
 113
 114 &ehci {
 115         status = "okay";
 116 };
 117
 118 &ohci {
 119         status = "okay";
 120 };