target/linux/ramips/dts/MT7620a_MT7530.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
   7         model = "Ralink MT7620a + MT7530 evaluation board";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         m25p80@0 {
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16                 compatible = "jedec,spi-nor";
  17                 reg = <0>;
  18                 spi-max-frequency = <10000000>;
  19
  20                 partition@0 {
  21                         label = "u-boot";
  22                         reg = <0x0 0x30000>;
  23                         read-only;
  24                 };
  25
  26                 partition@30000 {
  27                         label = "u-boot-env";
  28                         reg = <0x30000 0x10000>;
  29                         read-only;
  30                 };
  31
  32                 factory: partition@40000 {
  33                         label = "factory";
  34                         reg = <0x40000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 partition@50000 {
  39                         label = "firmware";
  40                         reg = <0x50000 0x7b0000>;
  41                 };
  42         };
  43 };
  44
  45 &pinctrl {
  46         state_default: pinctrl0 {
  47                 gpio {
  48                         ralink,group = "i2c", "uartf";
  49                         ralink,function = "gpio";
  50                 };
  51         };
  52 };
  53
  54 &ethernet {
  55         status = "okay";
  56         pinctrl-names = "default";
  57         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  58         mediatek,portmap = "llllw";
  59
  60         port@5 {
  61                 status = "okay";
  62                 mediatek,fixed-link = <1000 1 1 1>;
  63                 phy-mode = "rgmii";
  64         };
  65
  66         mdio-bus {
  67                 status = "okay";
  68
  69                 phy0: ethernet-phy@0 {
  70                         reg = <0>;
  71                         phy-mode = "rgmii";
  72                 };
  73
  74                 phy1: ethernet-phy@1 {
  75                         reg = <1>;
  76                         phy-mode = "rgmii";
  77                 };
  78
  79                 phy2: ethernet-phy@2 {
  80                         reg = <2>;
  81                         phy-mode = "rgmii";
  82                 };
  83
  84                 phy3: ethernet-phy@3 {
  85                         reg = <3>;
  86                         phy-mode = "rgmii";
  87                 };
  88
  89                 phy4: ethernet-phy@4 {
  90                         reg = <4>;
  91                         phy-mode = "rgmii";
  92                 };
  93
  94                 phy1f: ethernet-phy@1f {
  95                         reg = <0x1f>;
  96                         phy-mode = "rgmii";
  97                 };
  98         };
  99 };
 100
 101 &gsw {
 102         mediatek,port4 = "gmac";
 103         mediatek,mt7530 = <1>;
 104 };
 105
 106 &pcie {
 107         status = "okay";
 108 };
 109
 110 &ehci {
 111         status = "okay";
 112 };
 113
 114 &ohci {
 115         status = "okay";
 116 };