target/linux/ramips/dts/MZK-750DHP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-soc";
   9         model = "Planex MZK-750DHP";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 wps {
  15                         label = "mzk-750dhp:green:wps";
  16                         gpios = <&gpio2 15 1>;
  17                 };
  18
  19                 power {
  20                         label = "mzk-750dhp:green:power";
  21                         gpios = <&gpio1 15 1>;
  22                 };
  23
  24                 wlan5g {
  25                         label = "mzk-750dhp:green:wlan5g";
  26                         gpios = <&gpio1 14 1>;
  27                 };
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34                 poll-interval = <20>;
  35
  36                 s1 {
  37                         label = "reset";
  38                         gpios = <&gpio0 1 1>;
  39                         linux,code = <KEY_RESTART>;
  40                 };
  41
  42                 s2 {
  43                         label = "wps";
  44                         gpios = <&gpio2 19 1>;
  45                         linux,code = <KEY_WPS_BUTTON>;
  46                 };
  47         };
  48 };
  49
  50 &gpio1 {
  51         status = "okay";
  52 };
  53
  54 &gpio2 {
  55         status = "okay";
  56 };
  57
  58 &spi0 {
  59         status = "okay";
  60
  61         m25p80@0 {
  62                 #address-cells = <1>;
  63                 #size-cells = <1>;
  64                 compatible = "jedec,spi-nor";
  65                 reg = <0>;
  66                 spi-max-frequency = <10000000>;
  67
  68                 partition@0 {
  69                         label = "u-boot";
  70                         reg = <0x0 0x30000>;
  71                         read-only;
  72                 };
  73
  74                 partition@30000 {
  75                         label = "u-boot-env";
  76                         reg = <0x30000 0x10000>;
  77                         read-only;
  78                 };
  79
  80                 factory: partition@40000 {
  81                         label = "factory";
  82                         reg = <0x40000 0x10000>;
  83                         read-only;
  84                 };
  85
  86                 partition@50000 {
  87                         label = "firmware";
  88                         reg = <0x50000 0x7b0000>;
  89                 };
  90         };
  91 };
  92
  93 &pinctrl {
  94         state_default: pinctrl0 {
  95                 gpio {
  96                         ralink,group = "i2c", "spi refclk", "rgmii1", "nd_sd";
  97                         ralink,function = "gpio";
  98                 };
  99         };
 100 };
 101
 102 &ethernet {
 103         pinctrl-names = "default";
 104         pinctrl-0 = <&ephy_pins>;
 105         mtd-mac-address = <&factory 0x4>;
 106         mediatek,portmap = "llllw";
 107 };
 108
 109 &gsw {
 110         mediatek,port4 = "ephy";
 111 };
 112
 113 &wmac {
 114         ralink,mtd-eeprom = <&factory 0>;
 115 };
 116
 117 &pcie {
 118         status = "okay";
 119
 120         pcie-bridge {
 121                 mt76@0,0 {
 122                         reg = <0x0000 0 0 0 0>;
 123                         device_type = "pci";
 124                         mediatek,mtd-eeprom = <&factory 0x8000>;
 125                 };
 126         };
 127 };