target/linux/ramips/dts/MZK-W300NH2.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,mzk-w300nh2", "ralink,rt3052-soc";
  10         model = "Planex MZK-W300NH2";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21                 #address-cells = <1>;
  22                 #size-cells = <1>;
  23
  24                 partition@0 {
  25                         label = "u-boot";
  26                         reg = <0x0 0x30000>;
  27                         read-only;
  28                 };
  29
  30                 partition@30000 {
  31                         label = "u-boot-env";
  32                         reg = <0x30000 0x10000>;
  33                         read-only;
  34                 };
  35
  36                 factory: partition@40000 {
  37                         label = "factory";
  38                         reg = <0x40000 0x10000>;
  39                         read-only;
  40                 };
  41
  42                 partition@3e0000 {
  43                         label = "cimage";
  44                         reg = <0x3e0000 0x20000>;
  45                         read-only;
  46                 };
  47
  48                 partition@50000 {
  49                         label = "firmware";
  50                         reg = <0x50000 0x390000>;
  51                 };
  52         };
  53
  54         gpio-leds {
  55                 compatible = "gpio-leds";
  56
  57                 led_power: power {
  58                         label = "mzk-w300nh2:green:power";
  59                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 wlan {
  63                         label = "mzk-w300nh2:amber:wlan";
  64                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 wps {
  68                         label = "mzk-w300nh2:amber:wps";
  69                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  70                 };
  71         };
  72
  73         gpio-keys-polled {
  74                 compatible = "gpio-keys-polled";
  75                 poll-interval = <20>;
  76
  77                 wps {
  78                         label = "wps";
  79                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  80                         linux,code = <KEY_WPS_BUTTON>;
  81                 };
  82
  83                 reset {
  84                         label = "reset";
  85                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_RESTART>;
  87                 };
  88
  89                 rt {
  90                         label = "rt";
  91                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  92                         linux,code = <BTN_0>;
  93                 };
  94         };
  95 };
  96
  97 &pinctrl {
  98         state_default: pinctrl0 {
  99                 gpio {
 100                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 101                         ralink,function = "gpio";
 102                 };
 103         };
 104 };
 105
 106 &ethernet {
 107         mtd-mac-address = <&factory 0x4>;
 108 };
 109
 110 &esw {
 111         mediatek,portmap = <0x2f>;
 112 };
 113
 114 &wmac {
 115         ralink,mtd-eeprom = <&factory 0>;
 116 };