target/linux/ramips/dts/MZK-WDPR.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6
   7 / {
   8         compatible = "planex,mzk-wdpr", "ralink,rt3052-soc";
   9         model = "Planex MZK-WDPR";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200";
  13         };
  14
  15         cfi@1f000000 {
  16                 compatible = "cfi-flash";
  17                 reg = <0x1f000000 0x800000>;
  18
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 label = "u-boot";
  29                                 reg = <0x0 0x30000>;
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 label = "u-boot-env";
  35                                 reg = <0x30000 0x10000>;
  36                                 read-only;
  37                         };
  38
  39                         factory: partition@40000 {
  40                                 label = "factory";
  41                                 reg = <0x40000 0x10000>;
  42                                 read-only;
  43                         };
  44
  45                         partition@7f0000 {
  46                                 label = "Data3G";
  47                                 reg = <0x7f0000 0x10000>;
  48                                 read-only;
  49                         };
  50
  51                         partition@50000 {
  52                                 compatible = "denx,uimage";
  53                                 label = "firmware";
  54                                 reg = <0x50000 0x680000>;
  55                         };
  56                 };
  57         };
  58
  59         gpio-export {
  60                 compatible = "gpio-export";
  61
  62                 lcd_ctrl1 {
  63                         gpio-export,name = "lcd_ctrl1";
  64                         gpio-export,output = <0>;
  65                         gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  66                 };
  67         };
  68 };
  69
  70 &pinctrl {
  71         state_default: pinctrl0 {
  72                 gpio {
  73                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  74                         ralink,function = "gpio";
  75                 };
  76         };
  77 };
  78
  79 &ethernet {
  80         mtd-mac-address = <&factory 0x28>;
  81 };
  82
  83 &esw {
  84         mediatek,portmap = <0x2f>;
  85 };
  86
  87 &wmac {
  88         ralink,mtd-eeprom = <&factory 0>;
  89 };
  90
  91 &otg {
  92         status = "okay";
  93 };