target/linux/ramips/dts/MZK-WDPR.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "MZK-WDPR", "ralink,rt3052-soc";
   7         model = "Planex MZK-WDPR";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         cfi@1f000000 {
  14                 compatible = "cfi-flash";
  15                 reg = <0x1f000000 0x800000>;
  16
  17                 bank-width = <2>;
  18                 device-width = <2>;
  19                 #address-cells = <1>;
  20                 #size-cells = <1>;
  21
  22                 partition@0 {
  23                         label = "u-boot";
  24                         reg = <0x0 0x30000>;
  25                         read-only;
  26                 };
  27
  28                 partition@30000 {
  29                         label = "u-boot-env";
  30                         reg = <0x30000 0x10000>;
  31                         read-only;
  32                 };
  33
  34                 factory: partition@40000 {
  35                         label = "factory";
  36                         reg = <0x40000 0x10000>;
  37                         read-only;
  38                 };
  39
  40                 partition@7f0000 {
  41                         label = "Data3G";
  42                         reg = <0x7f0000 0x10000>;
  43                         read-only;
  44                 };
  45
  46                 partition@50000 {
  47                         label = "firmware";
  48                         reg = <0x50000 0x680000>;
  49                 };
  50         };
  51
  52         gpio-export {
  53                 compatible = "gpio-export";
  54
  55                 lcd_ctrl1 {
  56                         gpio-export,name = "lcd_ctrl1";
  57                         gpio-export,output = <0>;
  58                         gpios = <&gpio0 1 0>;
  59                 };
  60         };
  61 };
  62
  63 &pinctrl {
  64         state_default: pinctrl0 {
  65                 gpio {
  66                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  67                         ralink,function = "gpio";
  68                 };
  69         };
  70 };
  71
  72 &ethernet {
  73         mtd-mac-address = <&factory 0x28>;
  74 };
  75
  76 &esw {
  77         mediatek,portmap = <0x2f>;
  78 };
  79
  80 &wmac {
  81         ralink,mtd-eeprom = <&factory 0>;
  82 };
  83
  84 &otg {
  85         status = "okay";
  86 };