target/linux/ramips/dts/RB750Gr3.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/gpio/gpio.h>
   7
   8 / {
   9         compatible = "mikrotik,rb750gr3", "mediatek,mt7621-soc";
  10         model = "MikroTik RB750Gr3";
  11
  12         aliases {
  13                 led-boot = &led_pwr;
  14                 led-failsafe = &led_pwr;
  15                 led-running = &led_pwr;
  16                 led-upgrade = &led_pwr;
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x0 0x10000000>;
  22         };
  23
  24         chosen {
  25                 bootargs = "console=ttyS0,57600";
  26         };
  27
  28         gpio-leds {
  29                 compatible = "gpio-leds";
  30
  31                 led_pwr: pwr {
  32                         label = "rb750gr3:blue:pwr";
  33                         gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
  34                 };
  35
  36                 usr {
  37                         label = "rb750gr3:green:usr";
  38                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  39                 };
  40         };
  41
  42         gpio-keys-polled {
  43                 compatible = "gpio-keys-polled";
  44                 poll-interval = <20>;
  45
  46                 mode {
  47                         label = "mode";
  48                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RFKILL>;
  50                 };
  51
  52                 res {
  53                         label = "res";
  54                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  55                         linux,code = <KEY_RESTART>;
  56                 };
  57         };
  58
  59         gpio_export {
  60                 compatible = "gpio-export";
  61                 #size-cells = <0>;
  62
  63                 buzzer {
  64                         gpio-export,name = "buzzer";
  65                         gpio-export,output = <0>;
  66                         gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
  67                 };
  68
  69                 usb {
  70                         gpio-export,name = "usb";
  71                         gpio-export,output = <1>;
  72                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  73                 };
  74         };
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         m25p80@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <10000000>;
  84                 m25p,chunked-io = <32>;
  85
  86                 partitions {
  87                         compatible = "fixed-partitions";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90
  91                         partition@0 {
  92                                 label = "u-boot";
  93                                 reg = <0x0 0x30000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@30000 {
  98                                 label = "u-boot-env";
  99                                 reg = <0x30000 0x10000>;
 100                                 read-only;
 101                         };
 102
 103                         factory: partition@40000 {
 104                                 label = "factory";
 105                                 reg = <0x40000 0x10000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@50000 {
 110                                 label = "firmware";
 111                                 reg = <0x50000 0xfb0000>;
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &ethernet {
 118         mtd-mac-address = <&factory 0xe000>;
 119         mtd-mac-address-increment = <1>;
 120 };
 121
 122 &pinctrl {
 123         state_default: pinctrl0 {
 124                 gpio {
 125                         ralink,group = "i2c", "uart2", "uart3", "pcie", "rgmii2", "jtag";
 126                         ralink,function = "gpio";
 127                 };
 128         };
 129 };
 130
 131 &sdhci {
 132         status = "okay";
 133 };