target/linux/ramips/dts/RE6500.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Linksys RE6500";
   9
  10         memory@0 {
  11                 device_type = "memory";
  12                 reg = <0x0 0x4000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,57600";
  17         };
  18
  19         gpio-leds {
  20                 compatible = "gpio-leds";
  21
  22                 wifi {
  23                         label = "re6500:orange:wifi";
  24                         gpios = <&gpio0 0 0>;
  25                 };
  26
  27                 power {
  28                         label = "re6500:white:power";
  29                         gpios = <&gpio0 9 0>;
  30                 };
  31         };
  32
  33         gpio-keys-polled {
  34                 compatible = "gpio-keys-polled";
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37                 poll-interval = <20>;
  38
  39                 wps {
  40                         label = "wps";
  41                         gpios = <&gpio0 10 1>;
  42                         linux,code = <KEY_WPS_BUTTON>;
  43                 };
  44
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio0 11 0>;
  48                         linux,code = <KEY_RESTART>;
  49                 };
  50         };
  51 };
  52
  53 &spi0 {
  54         status = "okay";
  55
  56         m25p80@0 {
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 compatible = "jedec,spi-nor";
  60                 reg = <0>;
  61                 spi-max-frequency = <10000000>;
  62                 m25p,chunked-io = <32>;
  63
  64                 partition@0 {
  65                         label = "u-boot";
  66                         reg = <0x0 0x30000>;
  67                         read-only;
  68                 };
  69
  70                 partition@30000 {
  71                         label = "u-boot-env";
  72                         reg = <0x30000 0x10000>;
  73                         read-only;
  74                 };
  75
  76                 factory: partition@40000 {
  77                         label = "factory";
  78                         reg = <0x40000 0x10000>;
  79                         read-only;
  80                 };
  81
  82                 partition@50000 {
  83                         label = "firmware";
  84                         reg = <0x50000 0x7b0000>;
  85                 };
  86         };
  87 };
  88
  89 &pinctrl {
  90         state_default: pinctrl0 {
  91                 gpio {
  92                         ralink,group = "i2c", "uart2", "uart3", "rgmii2";
  93                         ralink,function = "gpio";
  94                 };
  95         };
  96 };
  97
  98 &pcie {
  99         status = "okay";
 100
 101         pcie0 {
 102                 mt76@0,0 {
 103                         reg = <0x0000 0 0 0 0>;
 104                         device_type = "pci";
 105                         mediatek,mtd-eeprom = <&factory 0x0000>;
 106                         ieee80211-freq-limit = <5000000 6000000>;
 107                 };
 108         };
 109
 110         pcie1 {
 111                 mt76@1,0 {
 112                         reg = <0x0000 0 0 0 0>;
 113                         device_type = "pci";
 114                         mediatek,mtd-eeprom = <&factory 0x8000>;
 115                         ieee80211-freq-limit = <2400000 2500000>;
 116                 };
 117         };
 118 };
 119
 120 &ethernet {
 121         mtd-mac-address = <&factory 0x2e>;
 122 };
 123
 124 &xhci {
 125         status = "disabled";
 126 };