target/linux/ramips/dts/RT-N15.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         #address-cells = <1>;
  10         #size-cells = <1>;
  11         compatible = "asus,rt-n15", "ralink,rt2880-soc";
  12         model = "Asus RT-N15";
  13
  14         cfi@1f000000 {
  15                 compatible = "cfi-flash";
  16                 reg = <0x1f000000 0x800000>;
  17                 bank-width = <2>;
  18                 device-width = <2>;
  19                 #address-cells = <1>;
  20                 #size-cells = <1>;
  21
  22                 partition@0 {
  23                         label = "uboot";
  24                         reg = <0x0 0x30000>;
  25                         read-only;
  26                 };
  27
  28                 partition@30000 {
  29                         label = "uboot-env";
  30                         reg = <0x30000 0x10000>;
  31                         read-only;
  32                 };
  33
  34                 factory: partition@40000 {
  35                         label = "factory";
  36                         reg = <0x40000 0x10000>;
  37                         read-only;
  38                 };
  39
  40                 partition@50000 {
  41                         label = "firmware";
  42                         reg = <0x50000 0x3b0000>;
  43                 };
  44         };
  45
  46         rtl8366s {
  47                 compatible = "realtek,rtl8366s";
  48                 gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
  49                 gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
  50         };
  51
  52         gpio-keys-polled {
  53                 compatible = "gpio-keys-polled";
  54                 #address-cells = <1>;
  55                 #size-cells = <0>;
  56                 poll-interval = <100>;
  57
  58                 wps {
  59                         label = "wps";
  60                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  61                         linux,code = <KEY_WPS_BUTTON>;
  62                 };
  63
  64                 reset {
  65                         label = "reset";
  66                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  67                         linux,code = <KEY_RESTART>;
  68                 };
  69         };
  70
  71         gpio-leds {
  72                 compatible = "gpio-leds";
  73
  74                 power {
  75                         label = "rt-n15:blue:power";
  76                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  77                 };
  78         };
  79 };
  80
  81 &gpio0 {
  82         status = "okay";
  83 };
  84
  85 &pinctrl {
  86         state_default: pinctrl0 {
  87                 gpio {
  88                         ralink,group = "i2c", "uartlite", "mdio";
  89                         ralink,function = "gpio";
  90                 };
  91         };
  92 };
  93
  94 &ethernet {
  95         status = "okay";
  96         mtd-mac-address = <&factory 0x4>;
  97
  98         port@0 {
  99                 mediatek,fixed-link = <1000 1 1 1>;
 100         };
 101
 102         mdio-bus {
 103                 status = "okay";
 104
 105                 phy0: ethernet-phy@0 {
 106                         phy-mode = "mii";
 107                         reg = <0>;
 108                 };
 109         };
 110 };
 111
 112 &wmac {
 113         ralink,mtd-eeprom = <&factory 0>;
 114 };