target/linux/ramips/dts/RUT5XX.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "teltonika,rut5xx", "ralink,rt3050-soc";
  10         model = "Teltonika RUT5XX";
  11
  12         aliases {
  13                 led-status = &led_status;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_status: status {
  20                         label = "rut5xx:green:status";
  21                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  22                 };
  23         };
  24
  25         gpio-keys-polled {
  26                 compatible = "gpio-keys-polled";
  27                 poll-interval = <20>;
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_RESTART>;
  33                 };
  34         };
  35 };
  36
  37 &spi0 {
  38         status = "okay";
  39
  40         m25p80@0 {
  41                 #address-cells = <1>;
  42                 #size-cells = <1>;
  43                 compatible = "jedec,spi-nor";
  44                 reg = <0>;
  45                 spi-max-frequency = <10000000>;
  46
  47                 partition@0 {
  48                         label = "u-boot";
  49                         reg = <0x0 0x30000>;
  50                         read-only;
  51                 };
  52
  53                 partition@30000 {
  54                         label = "u-boot-env";
  55                         reg = <0x30000 0x10000>;
  56                         read-only;
  57                 };
  58
  59                 factory: partition@40000 {
  60                         label = "factory";
  61                         reg = <0x40000 0x10000>;
  62                         read-only;
  63                 };
  64
  65                 partition@50000 {
  66                         label = "firmware";
  67                         reg = <0x50000 0xfb0000>;
  68                 };
  69         };
  70 };
  71
  72 &pinctrl {
  73         state_default: pinctrl0 {
  74                 gpio {
  75                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  76                         ralink,function = "gpio";
  77                 };
  78         };
  79 };
  80
  81 &ethernet {
  82         mtd-mac-address = <&factory 0x28>;
  83 };
  84
  85 &esw {
  86         mediatek,portmap = <0x3e>;
  87 };
  88
  89 &wmac {
  90         ralink,mtd-eeprom = <&factory 0>;
  91 };
  92
  93 &otg {
  94         status = "okay";
  95 };