ramips: fix dtc warnings
[openwrt/openwrt.git] / target / linux / ramips / dts / TEW-638APB-V2.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
10 model = "TRENDnet TEW-638APB v2";
11
12 aliases {
13 led-status = &led_wps_green;
14 };
15
16 cfi@1f000000 {
17 compatible = "cfi-flash";
18 reg = <0x1f000000 0x400000>;
19 bank-width = <2>;
20 device-width = <2>;
21 #address-cells = <1>;
22 #size-cells = <1>;
23
24 partition@0 {
25 label = "u-boot";
26 reg = <0x0 0x30000>;
27 read-only;
28 };
29
30 partition@30000 {
31 label = "u-boot-env";
32 reg = <0x30000 0x10000>;
33 read-only;
34 };
35
36 factory: partition@40000 {
37 label = "factory";
38 reg = <0x40000 0x10000>;
39 read-only;
40 };
41
42 partition@50000 {
43 label = "firmware";
44 reg = <0x50000 0x3b0000>;
45 };
46 };
47
48 gpio-keys-polled {
49 compatible = "gpio-keys-polled";
50 poll-interval = <20>;
51
52 reset {
53 label = "reset";
54 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
55 linux,code = <KEY_RESTART>;
56 };
57
58 wps {
59 label = "wps";
60 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
61 linux,code = <KEY_WPS_BUTTON>;
62 };
63 };
64
65 gpio-leds {
66 compatible = "gpio-leds";
67
68 wps {
69 label = "tew-638apb-v2:orange:wps";
70 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
71 };
72
73 led_wps_green: wps2 {
74 label = "tew-638apb-v2:green:wps";
75 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
76 };
77 };
78 };
79
80 &pinctrl {
81 state_default: pinctrl0 {
82 gpio {
83 ralink,group = "uartf";
84 ralink,function = "gpio";
85 };
86 };
87 };
88
89 &ethernet {
90 mtd-mac-address = <&factory 0x4>;
91 };
92
93 &esw {
94 mediatek,portmap = <0x2f>;
95 };
96
97 &wmac {
98 ralink,mtd-eeprom = <&factory 0>;
99 };