target/linux/ramips/dts/TL-WR84XN.dtsi

   1 #include "mt7628an.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyS0,115200";
   6         };
   7
   8         memory@0 {
   9                 device_type = "memory";
  10                 reg = <0x0 0x4000000>;
  11         };
  12 };
  13
  14 &spi0 {
  15         status = "okay";
  16
  17         m25p80@0 {
  18                 #address-cells = <1>;
  19                 #size-cells = <1>;
  20                 compatible = "jedec,spi-nor";
  21                 reg = <0>;
  22                 spi-max-frequency = <10000000>;
  23                 m25p,chunked-io = <32>;
  24
  25                 partition@0 {
  26                         label = "boot";
  27                         reg = <0x0 0x20000>;
  28                         read-only;
  29                 };
  30
  31                 partition@20000 {
  32                         label = "firmware";
  33                         reg = <0x20000 0x7a0000>;
  34                 };
  35
  36                 partition@7c0000 {
  37                         label = "config";
  38                         reg = <0x7c0000 0x10000>;
  39                         read-only;
  40                 };
  41
  42                 factory: partition@7d0000 {
  43                         label = "factory";
  44                         reg = <0x7d0000 0x30000>;
  45                         read-only;
  46                 };
  47         };
  48 };
  49
  50 &ehci {
  51         status = "disabled";
  52 };
  53
  54 &ohci {
  55         status = "disabled";
  56 };
  57
  58 &wmac {
  59         status = "okay";
  60         mtd-mac-address = <&factory 0xf100>;
  61         mediatek,mtd-eeprom = <&factory 0x20000>;
  62 };
  63
  64 &ethernet {
  65         mtd-mac-address = <&factory 0xf100>;
  66         mediatek,portmap = "llllw";
  67 };