target/linux/ramips/dts/U25AWF-H1.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 /{
   9         compatible = "kimax,u25awf-h1","ralink,mt7620a-soc";
  10         model = "Kimax U25AWF-H1";
  11
  12         aliases {
  13                 led-status = &led_wifi;
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27         };
  28
  29         gpio-leds {
  30                 compatible = "gpio-leds";
  31
  32                 led_wifi: wifi {
  33                         label = "u25awf:red:wifi";
  34                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 lan {
  38                         label = "u25awf:green:lan";
  39                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
  40                 };
  41         };
  42 };
  43
  44 &gpio2 {
  45         status = "okay";
  46 };
  47
  48 &gpio3 {
  49         status = "okay";
  50 };
  51
  52 &spi0 {
  53         status = "okay";
  54
  55         m25p80@0 {
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 compatible = "jedec,spi-nor";
  59                 reg = <0>;
  60                 spi-max-frequency = <10000000>;
  61
  62                 partition@0 {
  63                         label = "u-boot";
  64                         reg = <0x0 0x30000>;
  65                         read-only;
  66                 };
  67
  68                 partition@30000 {
  69                         label = "u-boot-env";
  70                         reg = <0x30000 0x10000>;
  71                         read-only;
  72                 };
  73
  74                 factory: partition@40000 {
  75                         label = "factory";
  76                         reg = <0x40000 0x10000>;
  77                         read-only;
  78                 };
  79
  80                 partition@50000 {
  81                         label = "firmware";
  82                         reg = <0x50000 0xfb0000>;
  83                 };
  84         };
  85 };
  86
  87 &ehci {
  88         status = "okay";
  89 };
  90
  91 &ohci {
  92         status = "okay";
  93 };
  94
  95 &ethernet {
  96         mtd-mac-address = <&factory 0x4>;
  97 };
  98
  99 &wmac {
 100         ralink,mtd-eeprom = <&factory 0>;
 101 };
 102
 103 &pinctrl {
 104         state_default: pinctrl0 {
 105                 default {
 106                         ralink,group = "uartf", "ephy", "wled";
 107                         ralink,function = "gpio";
 108                 };
 109         };
 110 };