target/linux/ramips/dts/VOCORE2.dts

   1 /dts-v1/;
   2
   3 #include "VOCORE2.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6
   7 / {
   8         compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
   9         model = "VoCore2";
  10
  11         aliases {
  12                 led-boot = &led_status;
  13                 led-failsafe = &led_status;
  14                 led-running = &led_status;
  15                 led-upgrade = &led_status;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 led_status: status {
  22                         label = "vocore2:fuchsia:status";
  23                         gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
  24                 };
  25         };
  26 };
  27
  28 &spi0 {
  29         status = "okay";
  30
  31         m25p80@0 {
  32                 compatible = "jedec,spi-nor";
  33                 reg = <0>;
  34                 spi-max-frequency = <10000000>;
  35
  36                 partitions {
  37                         compatible = "fixed-partitions";
  38                         #address-cells = <1>;
  39                         #size-cells = <1>;
  40
  41                         partition@0 {
  42                                 label = "u-boot";
  43                                 reg = <0x0 0x30000>;
  44                                 read-only;
  45                         };
  46
  47                         partition@30000 {
  48                                 label = "u-boot-env";
  49                                 reg = <0x30000 0x10000>;
  50                                 read-only;
  51                         };
  52
  53                         factory: partition@40000 {
  54                                 label = "factory";
  55                                 reg = <0x40000 0x10000>;
  56                                 read-only;
  57                         };
  58
  59                         partition@50000 {
  60                                 compatible = "denx,uimage";
  61                                 label = "firmware";
  62                                 reg = <0x50000 0xfb0000>;
  63                         };
  64                 };
  65         };
  66 };