target/linux/ramips/dts/W150M.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tenda,w150m", "ralink,rt3050-soc";
  10         model = "Tenda W150M";
  11
  12         aliases {
  13                 led-status = &led_ap;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21                 #address-cells = <1>;
  22                 #size-cells = <1>;
  23
  24                 partition@0 {
  25                         label = "u-boot";
  26                         reg = <0x0 0x30000>;
  27                         read-only;
  28                 };
  29
  30                 partition@30000 {
  31                         label = "u-boot-env";
  32                         reg = <0x30000 0x10000>;
  33                         read-only;
  34                 };
  35
  36                 factory: partition@40000 {
  37                         label = "factory";
  38                         reg = <0x40000 0x10000>;
  39                         read-only;
  40                 };
  41
  42                 partition@50000 {
  43                         label = "firmware";
  44                         reg = <0x50000 0x3c8000>;
  45                 };
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50
  51                 3grouter {
  52                         label = "w150m:blue:3grouter";
  53                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 led_ap: ap {
  57                         label = "w150m:blue:ap";
  58                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 wisprouter {
  62                         label = "w150m:blue:wisprouter";
  63                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wirelessrouter {
  67                         label = "w150m:blue:wirelessrouter";
  68                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 3g {
  72                         label = "w150m:blue:3g";
  73                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 wpsreset {
  77                         label = "w150m:blue:wpsreset";
  78                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  79                 };
  80         };
  81
  82         gpio-keys-polled {
  83                 compatible = "gpio-keys-polled";
  84                 poll-interval = <20>;
  85
  86                 reset {
  87                         label = "reset";
  88                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  89                         linux,code = <KEY_RESTART>;
  90                 };
  91
  92                 mode {
  93                         label = "mode";
  94                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  95                         linux,code = <BTN_0>;
  96                 };
  97         };
  98 };
  99
 100 &pinctrl {
 101         state_default: pinctrl0 {
 102                 gpio {
 103                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 104                         ralink,function = "gpio";
 105                 };
 106         };
 107 };
 108
 109 &ethernet {
 110         mtd-mac-address = <&factory 0x4>;
 111 };
 112
 113 &esw {
 114         mediatek,portmap = <0x2f>;
 115 };
 116
 117 &wmac {
 118         ralink,mtd-eeprom = <&factory 0>;
 119 };