target/linux/ramips/dts/W150M.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "W150M", "ralink,rt3050-soc";
   9         model = "Tenda W150M";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "u-boot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "u-boot-env";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 factory: partition@40000 {
  32                         label = "factory";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "firmware";
  39                         reg = <0x50000 0x3c8000>;
  40                 };
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45
  46                 3grouter {
  47                         label = "w150m:blue:3grouter";
  48                         gpios = <&gpio0 11 1>;
  49                 };
  50
  51                 ap {
  52                         label = "w150m:blue:ap";
  53                         gpios = <&gpio0 12 1>;
  54                 };
  55
  56                 wisprouter {
  57                         label = "w150m:blue:wisprouter";
  58                         gpios = <&gpio0 9 1>;
  59                 };
  60
  61                 wirelessrouter {
  62                         label = "w150m:blue:wirelessrouter";
  63                         gpios = <&gpio0 13 1>;
  64                 };
  65
  66                 3g {
  67                         label = "w150m:blue:3g";
  68                         gpios = <&gpio0 7 1>;
  69                 };
  70
  71                 wpsreset {
  72                         label = "w150m:blue:wpsreset";
  73                         gpios = <&gpio0 14 1>;
  74                 };
  75         };
  76
  77         gpio-keys-polled {
  78                 compatible = "gpio-keys-polled";
  79                 #address-cells = <1>;
  80                 #size-cells = <0>;
  81                 poll-interval = <20>;
  82
  83                 reset {
  84                         label = "reset";
  85                         gpios = <&gpio0 0 1>;
  86                         linux,code = <KEY_RESTART>;
  87                 };
  88
  89                 mode {
  90                         label = "mode";
  91                         gpios = <&gpio0 10 1>;
  92                         linux,code = <BTN_0>;
  93                 };
  94         };
  95 };
  96
  97 &pinctrl {
  98         state_default: pinctrl0 {
  99                 gpio {
 100                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 101                         ralink,function = "gpio";
 102                 };
 103         };
 104 };
 105
 106 &ethernet {
 107         mtd-mac-address = <&factory 0x4>;
 108 };
 109
 110 &esw {
 111         mediatek,portmap = <0x2f>;
 112 };
 113
 114 &wmac {
 115         ralink,mtd-eeprom = <&factory 0>;
 116 };