target/linux/ramips/dts/WF-2881.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "NETIS WF-2881";
   9
  10         memory@0 {
  11                 device_type = "memory";
  12                 reg = <0x0 0x8000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,57600";
  17         };
  18
  19         gpio-leds {
  20                 compatible = "gpio-leds";
  21
  22                 usb {
  23                         label = "wf-2881:green:usb";
  24                         gpios = <&gpio0 6 1>;
  25                 };
  26
  27                 wps {
  28                         label = "wf-2881:green:wps";
  29                         gpios = <&gpio0 0 1>;
  30                 };
  31         };
  32
  33         gpio-keys-polled {
  34                 compatible = "gpio-keys-polled";
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37                 poll-interval = <20>;
  38
  39                 reset {
  40                         label = "reset";
  41                         gpios = <&gpio0 12 1>;
  42                         linux,code = <KEY_RESTART>;
  43                 };
  44         };
  45 };
  46
  47 &nand {
  48         status = "okay";
  49
  50         partition@0 {
  51                 label = "u-boot";
  52                 reg = <0x0 0x30000>;
  53                 read-only;
  54         };
  55
  56         partition@30000 {
  57                 label = "u-boot-env";
  58                 reg = <0x30000 0x1000>;
  59                 read-only;
  60         };
  61
  62         partition@80000 {
  63                 label = "config";
  64                 reg = <0x80000 0x80000>;
  65                 read-only;
  66         };
  67
  68         factory: partition@100000 {
  69                 label = "factory";
  70                 reg = <0x100000 0x40000>;
  71                 read-only;
  72         };
  73
  74         partition@140000 {
  75                 label = "firmware";
  76                 reg = <0x140000 0x7E40000>;
  77         };
  78 };
  79
  80 &pcie {
  81         status = "okay";
  82
  83         pcie0 {
  84                 mt76@0,0 {
  85                         reg = <0x0000 0 0 0 0>;
  86                         device_type = "pci";
  87                         mediatek,mtd-eeprom = <&factory 0x8000>;
  88                         mediatek,2ghz = <0>;
  89                 };
  90         };
  91
  92         pcie1 {
  93                 mt76@1,0 {
  94                         reg = <0x0000 0 0 0 0>;
  95                         device_type = "pci";
  96                         mediatek,mtd-eeprom = <&factory 0x0000>;
  97                         mediatek,5ghz = <0>;
  98                 };
  99         };
 100 };
 101
 102 &ethernet {
 103         mtd-mac-address = <&factory 0xe006>;
 104 };
 105
 106 &pinctrl {
 107         state_default: pinctrl0 {
 108                 gpio {
 109                         ralink,group = "uart3", "jtag";
 110                         ralink,function = "gpio";
 111                 };
 112         };
 113 };