target/linux/ramips/dts/WHR-G300N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WHR-G300N", "ralink,rt3052-soc";
   7         model = "Buffalo WHR-G300N";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26         };
  27
  28         esw@10110000 {
  29                 ralink,portmap = <0x2f>;
  30         };
  31
  32         /* FIXME: no partitions defined */
  33 /*      wmac@10180000 {
  34                 ralink,mtd-eeprom = <&factory 0>;
  35         };
  36 */
  37         gpio-leds {
  38                 compatible = "gpio-leds";
  39                 diag {
  40                         label = "whr-g300n:red:diag";
  41                         gpios = <&gpio0 7 1>;
  42                 };
  43                 router {
  44                         label = "whr-g300n:green:router";
  45                         gpios = <&gpio0 9 1>;
  46                 };
  47                 security {
  48                         label = "whr-g300n:amber:security";
  49                         gpios = <&gpio0 14 1>;
  50                 };
  51         };
  52
  53         gpio-keys-polled {
  54                 compatible = "gpio-keys-polled";
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57                 poll-interval = <20>;
  58                 reset {
  59                         label = "reset";
  60                         gpios = <&gpio0 10 1>;
  61                         linux,code = <0x198>;
  62                 };
  63                 aoss {
  64                         label = "aoss";
  65                         gpios = <&gpio0 0 1>;
  66                         linux,code = <0x211>;
  67                 };
  68                 router-off {
  69                         label = "router-off";
  70                         gpios = <&gpio0 11 1>;
  71                         linux,code = <0x102>;
  72                 };
  73                 router-on {
  74                         label = "router-on";
  75                         gpios = <&gpio0 8 1>;
  76                         linux,code = <0x103>;
  77                 };
  78         };
  79 };