target/linux/ramips/dts/WMDR-143N.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 / {
   6         compatible = "loewe,wmdr-143n", "ralink,rt3883-soc";
   7         model = "Loewe WMDR-143N";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         m25p80@0 {
  14                 compatible = "jedec,spi-nor";
  15                 reg = <0>;
  16                 spi-max-frequency = <25000000>;
  17
  18                 partitions {
  19                         compatible = "fixed-partitions";
  20                         #address-cells = <1>;
  21                         #size-cells = <1>;
  22
  23                         partition@0 {
  24                                 label = "u-boot";
  25                                 reg = <0x0 0x30000>;
  26                                 read-only;
  27                         };
  28
  29                         partition@30000 {
  30                                 label = "u-boot-env";
  31                                 reg = <0x30000 0x00010000>;
  32                                 read-only;
  33                         };
  34
  35                         factory: partition@40000 {
  36                                 label = "factory";
  37                                 reg = <0x40000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         partition@50000 {
  42                                 label = "firmware";
  43                                 reg = <0x50000 0x7b0000>;
  44                         };
  45                 };
  46         };
  47 };
  48
  49 &ethernet {
  50         port@0 {
  51                 phy-handle = <&phy0>;
  52                 phy-mode = "mii";
  53         };
  54         mdio-bus {
  55                 status = "okay";
  56
  57                 phy0: ethernet-phy@0 {
  58                         reg = <0>;
  59                         phy-mode = "mii";
  60                 };
  61         };
  62 };
  63
  64 &wmac {
  65         status = "okay";
  66         ralink,mtd-eeprom = <&factory 0>;
  67         mtd-mac-address = <&factory 0x4>;
  68 };