target/linux/ramips/dts/WRTNODE2.dtsi

   1 /dts-v1/;
   2
   3 /include/ "mt7628an.dtsi"
   4
   5 / {
   6         chosen {
   7                 bootargs = "console=ttyS0,115200";
   8         };
   9
  10         palmbus@10000000 {
  11                 spi@b00 {
  12                         status = "okay";
  13
  14                         m25p80@0 {
  15                                 #address-cells = <1>;
  16                                 #size-cells = <1>;
  17                                 compatible = "jedec,spi-nor";
  18                                 reg = <0 0>;
  19                                 spi-max-frequency = <10000000>;
  20                                 m25p,chunked-io = <32>;
  21
  22                                 partition@0 {
  23                                         label = "u-boot";
  24                                         reg = <0x0 0x30000>;
  25                                         read-only;
  26                                 };
  27
  28                                 partition@30000 {
  29                                         label = "u-boot-env";
  30                                         reg = <0x30000 0x10000>;
  31                                         read-only;
  32                                 };
  33
  34                                 factory: partition@40000 {
  35                                         label = "factory";
  36                                         reg = <0x40000 0x10000>;
  37                                         read-only;
  38                                 };
  39
  40                                 partition@50000 {
  41                                         label = "firmware";
  42                                         reg = <0x50000 0x1fb0000>;
  43                                 };
  44                         };
  45
  46
  47                         spidev@1 {
  48                                 #address-cells = <1>;
  49                                 #size-cells = <1>;
  50                                 compatible = "spidev";
  51                                 reg = <1 0>;
  52                                 linux,modalias = "spidev", "spidev";
  53                                 spi-max-frequency = <10000000>;
  54                         };
  55                 };
  56
  57                 uart1@d00 {
  58                         status = "okay";
  59                 };
  60
  61                 i2c@900 {
  62                         status = "okay";
  63                 };
  64
  65         };
  66
  67         ethernet@10100000 {
  68                 mtd-mac-address = <&factory 0x4>;
  69                 ralink,port-map = "llllw";
  70         };
  71
  72         sdhci@10130000 {
  73                 status = "okay";
  74         };
  75
  76         pcie@10140000 {
  77                 status = "okay";
  78         };
  79
  80
  81         gpio-keys-polled {
  82                 compatible = "gpio-keys-polled";
  83                 #address-cells = <1>;
  84                 #size-cells = <0>;
  85                 poll-interval = <20>;
  86
  87                 reset {
  88                         label = "reset";
  89                         gpios = <&gpio0 5 1>;
  90                         linux,code = <0x198>;
  91                 };
  92         };
  93
  94 };
  95