target/linux/ramips/dts/mt7620a_iodata_wn-ac733gr3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7620a.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "iodata,wn-ac733gr3", "ralink,mt7620a-soc";
  11         model = "I-O DATA WN-AC733GR3";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power: power {
  24                         label = "wn-ac733gr3:green:power";
  25                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 notification {
  30                         label = "wn-ac733gr3:green:notification";
  31                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 wlan2g {
  35                         label = "wn-ac733gr3:green:wlan2g";
  36                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 wlan5g {
  40                         label = "wn-ac733gr3:green:wlan5g";
  41                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys";
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53
  54                 wps {
  55                         label = "wps";
  56                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_WPS_BUTTON>;
  58                 };
  59
  60                 router {
  61                         label = "router";
  62                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  63                         linux,code = <BTN_0>;
  64                         linux,input-type = <EV_SW>;
  65                 };
  66
  67                 auto {
  68                         label = "auto";
  69                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  70                         linux,code = <BTN_0>;
  71                         linux,input-type = <EV_SW>;
  72                 };
  73         };
  74
  75         rtl8367rb {
  76                 compatible = "realtek,rtl8367b";
  77                 gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
  78                 gpio-sck = <&gpio0 23 GPIO_ACTIVE_HIGH>;
  79                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  80         };
  81 };
  82
  83 &spi0 {
  84         status = "okay";
  85
  86         flash@0 {
  87                 compatible = "jedec,spi-nor";
  88                 reg = <0>;
  89                 spi-max-frequency = <10000000>;
  90
  91                 partitions {
  92                         compatible = "fixed-partitions";
  93                         #address-cells = <1>;
  94                         #size-cells = <1>;
  95
  96                         partition@0 {
  97                                 label = "u-boot";
  98                                 reg = <0x0 0x30000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@30000 {
 103                                 label = "u-boot-env";
 104                                 reg = <0x30000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         factory: partition@40000 {
 109                                 label = "factory";
 110                                 reg = <0x40000 0x8000>;
 111                                 read-only;
 112                         };
 113
 114                         iNIC_rf: partition@48000 {
 115                                 label = "iNIC_rf";
 116                                 reg = <0x48000 0x8000>;
 117                                 read-only;
 118                         };
 119
 120                         partition@50000 {
 121                                 compatible = "denx,uimage";
 122                                 label = "firmware";
 123                                 reg = <0x50000 0x6d4000>;
 124                         };
 125
 126                         partition@724000 {
 127                                 label = "manufacture";
 128                                 reg = <0x724000 0x8c000>;
 129                                 read-only;
 130                         };
 131
 132                         partition@7b0000 {
 133                                 label = "backup";
 134                                 reg = <0x7b0000 0x10000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@7c0000 {
 139                                 label = "storage";
 140                                 reg = <0x7c0000 0x40000>;
 141                                 read-only;
 142                         };
 143                 };
 144         };
 145 };
 146
 147 &ethernet {
 148         pinctrl-names = "default";
 149         pinctrl-0 = <&rgmii1_pins>;
 150
 151         mtd-mac-address = <&factory 0x4>;
 152
 153         port@5 {
 154                 status = "okay";
 155                 mediatek,fixed-link = <1000 1 1 1>;
 156                 phy-mode = "rgmii";
 157         };
 158 };
 159
 160 &gpio0 {
 161         rtl8367rb_reset {
 162                 gpio-hog;
 163                 gpios = <0 GPIO_ACTIVE_HIGH>;
 164                 output-high;
 165                 line-name = "rtl8367rb-reset";
 166         };
 167 };
 168
 169 &state_default {
 170         gpio {
 171                 groups = "i2c", "uartf", "mdio";
 172                 function = "gpio";
 173         };
 174 };
 175
 176 &pcie {
 177         status = "okay";
 178 };
 179
 180 &pcie0 {
 181         wifi@0,0 {
 182                 compatible = "mediatek,mt76";
 183                 reg = <0x0000 0 0 0 0>;
 184                 mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
 185                 ieee80211-freq-limit = <5000000 6000000>;
 186         };
 187 };
 188
 189 &wmac {
 190         ralink,mtd-eeprom = <&factory 0x0>;
 191 };