target/linux/ramips/dts/mt7620a_netgear_ex3x00_ex61xx.dtsi

   1 #include "mt7620a.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         aliases {
   8                 led-boot = &led_power_amber;
   9                 led-failsafe = &led_power_amber;
  10                 led-running = &led_power_green;
  11                 led-upgrade = &led_power_green;
  12         };
  13
  14         keys {
  15                 compatible = "gpio-keys";
  16
  17                 reset {
  18                         label = "reset";
  19                         gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
  20                         linux,code = <KEY_RESTART>;
  21                 };
  22
  23                 wps {
  24                         label = "wps";
  25                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_WPS_BUTTON>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 led_power_green: power_green {
  34                         label = "green:power";
  35                         gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
  36                         default-state = "on";
  37                 };
  38
  39                 led_power_amber: power_amber {
  40                         label = "amber:power";
  41                         gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 router_green {
  45                         label = "green:router";
  46                         gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 router_red {
  50                         label = "red:router";
  51                         gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 device_green {
  55                         label = "green:device";
  56                         gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 device_red {
  60                         label = "red:device";
  61                         gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 wps {
  65                         label = "green:wps";
  66                         gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69 };
  70
  71 &gpio2 {
  72         status = "okay";
  73 };
  74
  75 &spi0 {
  76         status = "okay";
  77
  78         flash@0 {
  79                 compatible = "jedec,spi-nor";
  80                 reg = <0>;
  81                 spi-max-frequency = <50000000>;
  82
  83                 partitions {
  84                         compatible = "fixed-partitions";
  85                         #address-cells = <1>;
  86                         #size-cells = <1>;
  87
  88                         partition@0 {
  89                                 label = "u-boot";
  90                                 reg = <0x0 0x30000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@30000 {
  95                                 label = "config";
  96                                 reg = <0x30000 0x10000>;
  97                                 read-only;
  98                         };
  99
 100                         factory: partition@40000 {
 101                                 label = "factory";
 102                                 reg = <0x40000 0x10000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@50000 {
 107                                 compatible = "denx,uimage";
 108                                 label = "firmware";
 109                                 reg = <0x50000 0x790000>;
 110                         };
 111
 112                         partition@7e0000 {
 113                                 label = "board_data";
 114                                 reg = <0x7e0000 0x10000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@7f0000 {
 119                                 label = "nvram";
 120                                 reg = <0x7f0000 0x10000>;
 121                                 read-only;
 122                         };
 123                 };
 124         };
 125 };
 126
 127 &pcie {
 128         status = "okay";
 129 };
 130
 131 &pcie0 {
 132         mt76@0,0 {
 133                 reg = <0x0000 0 0 0 0>;
 134                 mediatek,mtd-eeprom = <&factory 0x8000>;
 135                 ieee80211-freq-limit = <5000000 6000000>;
 136         };
 137 };
 138
 139 &ethernet {
 140         nvmem-cells = <&macaddr_factory_28>;
 141         nvmem-cell-names = "mac-address";
 142 };
 143
 144 &wmac {
 145         ralink,mtd-eeprom = <&factory 0x0>;
 146 };
 147
 148 &state_default {
 149         default {
 150                 groups = "i2c", "rgmii2", "spi refclk";
 151                 function = "gpio";
 152         };
 153 };
 154
 155 &factory {
 156         compatible = "nvmem-cells";
 157         #address-cells = <1>;
 158         #size-cells = <1>;
 159
 160         macaddr_factory_28: macaddr@28 {
 161                 reg = <0x28 0x6>;
 162         };
 163 };