target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7530-evb.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-mt7530-evb", "ralink,mt7620a-soc";
   7         model = "Ralink MT7620a + MT7530 evaluation board";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         flash@0 {
  14                 compatible = "jedec,spi-nor";
  15                 reg = <0>;
  16                 spi-max-frequency = <10000000>;
  17
  18                 partitions {
  19                         compatible = "fixed-partitions";
  20                         #address-cells = <1>;
  21                         #size-cells = <1>;
  22
  23                         partition@0 {
  24                                 label = "u-boot";
  25                                 reg = <0x0 0x30000>;
  26                                 read-only;
  27                         };
  28
  29                         partition@30000 {
  30                                 label = "u-boot-env";
  31                                 reg = <0x30000 0x10000>;
  32                                 read-only;
  33                         };
  34
  35                         factory: partition@40000 {
  36                                 label = "factory";
  37                                 reg = <0x40000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         partition@50000 {
  42                                 compatible = "denx,uimage";
  43                                 label = "firmware";
  44                                 reg = <0x50000 0x7b0000>;
  45                         };
  46                 };
  47         };
  48 };
  49
  50 &state_default {
  51         gpio {
  52                 groups = "i2c", "uartf";
  53                 function = "gpio";
  54         };
  55 };
  56
  57 &ethernet {
  58         status = "okay";
  59         pinctrl-names = "default";
  60         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  61         mediatek,portmap = "llllw";
  62
  63         port@5 {
  64                 status = "okay";
  65                 mediatek,fixed-link = <1000 1 1 1>;
  66                 phy-mode = "rgmii";
  67         };
  68
  69         mdio-bus {
  70                 status = "okay";
  71
  72                 phy0: ethernet-phy@0 {
  73                         reg = <0>;
  74                         phy-mode = "rgmii";
  75                 };
  76
  77                 phy1: ethernet-phy@1 {
  78                         reg = <1>;
  79                         phy-mode = "rgmii";
  80                 };
  81
  82                 phy2: ethernet-phy@2 {
  83                         reg = <2>;
  84                         phy-mode = "rgmii";
  85                 };
  86
  87                 phy3: ethernet-phy@3 {
  88                         reg = <3>;
  89                         phy-mode = "rgmii";
  90                 };
  91
  92                 phy4: ethernet-phy@4 {
  93                         reg = <4>;
  94                         phy-mode = "rgmii";
  95                 };
  96
  97                 phy1f: ethernet-phy@1f {
  98                         reg = <0x1f>;
  99                         phy-mode = "rgmii";
 100                 };
 101         };
 102 };
 103
 104 &gsw {
 105         mediatek,port4 = "gmac";
 106 };
 107
 108 &pcie {
 109         status = "okay";
 110 };
 111
 112 &ehci {
 113         status = "okay";
 114 };
 115
 116 &ohci {
 117         status = "okay";
 118 };