target/linux/ramips/dts/mt7620a_ralink_mt7620a-mt7610e-evb.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ralink,mt7620a-mt7610e-evb", "ralink,mt7620a-soc";
  10         model = "Ralink MT7620A evaluation board";
  11
  12         keys {
  13                 compatible = "gpio-keys";
  14
  15                 wps {
  16                         label = "wps";
  17                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  18                         linux,code = <BTN_0>;
  19                 };
  20
  21                 reset {
  22                         label = "reset";
  23                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  24                         linux,code = <BTN_1>;
  25                 };
  26         };
  27 };
  28
  29 &gpio0 {
  30         status = "okay";
  31 };
  32
  33 &spi0 {
  34         status = "okay";
  35
  36         flash@0 {
  37                 compatible = "jedec,spi-nor";
  38                 reg = <0>;
  39                 spi-max-frequency = <1000000>;
  40
  41                 partitions {
  42                         compatible = "fixed-partitions";
  43                         #address-cells = <1>;
  44                         #size-cells = <1>;
  45
  46                         partition@0 {
  47                                 label = "u-boot";
  48                                 reg = <0x0 0x30000>;
  49                                 read-only;
  50                         };
  51
  52                         partition@30000 {
  53                                 label = "u-boot-env";
  54                                 reg = <0x30000 0x10000>;
  55                                 read-only;
  56                         };
  57
  58                         factory: partition@40000 {
  59                                 label = "factory";
  60                                 reg = <0x40000 0x10000>;
  61                                 read-only;
  62                         };
  63
  64                         partition@50000 {
  65                                 compatible = "denx,uimage";
  66                                 label = "firmware";
  67                                 reg = <0x50000 0x7b0000>;
  68                         };
  69                 };
  70         };
  71 };
  72
  73 &ethernet {
  74         pinctrl-names = "default";
  75         pinctrl-0 = <&ephy_pins>;
  76
  77         mediatek,portmap = "llllw";
  78 };
  79
  80 &gsw {
  81         mediatek,port4 = "ephy";
  82 };
  83
  84 &sdhci {
  85         status = "okay";
  86 };
  87
  88 &pcie {
  89         status = "okay";
  90 };
  91
  92 &pcie0 {
  93         wifi@0,0 {
  94                 reg = <0x0000 0 0 0 0>;
  95                 mediatek,mtd-eeprom = <&factory 0x8000>;
  96                 ieee80211-freq-limit = <5000000 6000000>;
  97         };
  98 };