target/linux/ramips/dts/mt7620a_tplink_archer.dtsi

   1 #include "mt7620a.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4 #include <dt-bindings/gpio/gpio.h>
   5
   6 / {
   7         chosen {
   8                 bootargs = "console=ttyS0,115200";
   9         };
  10
  11         keys {
  12                 compatible = "gpio-keys";
  13
  14                 reset {
  15                         label = "reset";
  16                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  17                         linux,code = <KEY_RESTART>;
  18                 };
  19
  20                 rfkill {
  21                         label = "rfkill";
  22                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  23                         linux,code = <KEY_RFKILL>;
  24                 };
  25         };
  26 };
  27
  28 &gpio1 {
  29         status = "okay";
  30 };
  31
  32 &gpio2 {
  33         status = "okay";
  34 };
  35
  36 &gpio3 {
  37         status = "okay";
  38 };
  39
  40 &spi0 {
  41         status = "okay";
  42
  43         flash@0 {
  44                 compatible = "jedec,spi-nor";
  45                 reg = <0>;
  46                 spi-max-frequency = <10000000>;
  47
  48                 partitions {
  49                         compatible = "fixed-partitions";
  50                         #address-cells = <1>;
  51                         #size-cells = <1>;
  52
  53                         partition@0 {
  54                                 label = "u-boot";
  55                                 reg = <0x0 0x20000>;
  56                                 read-only;
  57                         };
  58
  59                         partition@20000 {
  60                                 compatible = "tplink,firmware";
  61                                 label = "firmware";
  62                                 reg = <0x20000 0x7a0000>;
  63                         };
  64
  65                         partition@7c0000 {
  66                                 label = "config";
  67                                 reg = <0x7c0000 0x10000>;
  68                                 read-only;
  69                         };
  70
  71                         rom: partition@7d0000 {
  72                                 label = "rom";
  73                                 reg = <0x7d0000 0x10000>;
  74                                 read-only;
  75                         };
  76
  77                         partition@7e0000 {
  78                                 label = "romfile";
  79                                 reg = <0x7e0000 0x10000>;
  80                                 read-only;
  81                         };
  82
  83                         radio: partition@7f0000 {
  84                                 label = "radio";
  85                                 reg = <0x7f0000 0x10000>;
  86                                 read-only;
  87                         };
  88                 };
  89         };
  90 };
  91
  92 &ethernet {
  93         pinctrl-names = "default";
  94
  95         mtd-mac-address = <&rom 0xf100>;
  96
  97         mediatek,portmap = "wllll";
  98 };
  99
 100 &ehci {
 101         status = "okay";
 102 };
 103
 104 &ohci {
 105         status = "okay";
 106 };
 107
 108 &gsw {
 109         mediatek,port4 = "ephy";
 110 };
 111
 112 &wmac {
 113         ralink,mtd-eeprom = <&radio 0x0>;
 114 };
 115
 116 &pcie {
 117         status = "okay";
 118 };
 119
 120 &pcie0 {
 121         wifi: mt76@0,0 {
 122                 reg = <0x0000 0 0 0 0>;
 123                 mediatek,mtd-eeprom = <&radio 0x8000>;
 124                 ieee80211-freq-limit = <5000000 6000000>;
 125         };
 126 };