ramips: use DT trigger for 2G WiFi on ASUS RT-AC51U
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_xiaomi_miwifi-mini.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
10 model = "Xiaomi MiWiFi Mini";
11
12 aliases {
13 led-boot = &led_blue;
14 led-failsafe = &led_blue;
15 led-running = &led_blue;
16 led-upgrade = &led_blue;
17 label-mac-device = &ethernet;
18 };
19
20 chosen {
21 bootargs = "console=ttyS0,115200";
22 };
23
24 leds {
25 compatible = "gpio-leds";
26
27 led_blue: blue {
28 label = "miwifi-mini:blue:status";
29 gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
30 default-state = "on";
31 };
32
33 yellow {
34 label = "miwifi-mini:yellow:status";
35 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
36 };
37
38 red {
39 label = "miwifi-mini:red:status";
40 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
41 };
42 };
43
44 keys {
45 compatible = "gpio-keys";
46
47 reset {
48 label = "reset";
49 gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
50 linux,code = <KEY_RESTART>;
51 };
52 };
53 };
54
55 &gpio0 {
56 status = "okay";
57 };
58
59 &gpio1 {
60 status = "okay";
61 };
62
63 &gpio2 {
64 status = "okay";
65 };
66
67 &spi0 {
68 status = "okay";
69
70 flash@0 {
71 compatible = "jedec,spi-nor";
72 reg = <0>;
73 spi-max-frequency = <10000000>;
74
75 partitions {
76 compatible = "fixed-partitions";
77 #address-cells = <1>;
78 #size-cells = <1>;
79
80 partition@0 {
81 label = "u-boot";
82 reg = <0x0 0x30000>;
83 };
84
85 partition@30000 {
86 label = "u-boot-env";
87 reg = <0x30000 0x10000>;
88 read-only;
89 };
90
91 factory: partition@40000 {
92 label = "factory";
93 reg = <0x40000 0x10000>;
94 read-only;
95 };
96
97 partition@50000 {
98 compatible = "denx,uimage";
99 label = "firmware";
100 reg = <0x50000 0xf80000>;
101 };
102
103 partition@fd0000 {
104 label = "crash";
105 reg = <0xfd0000 0x10000>;
106 };
107
108 partition@fe0000 {
109 label = "reserved";
110 reg = <0xfe0000 0x10000>;
111 read-only;
112 };
113
114 partition@ff0000 {
115 label = "Bdata";
116 reg = <0xff0000 0x10000>;
117 };
118 };
119 };
120 };
121
122 &ehci {
123 status = "okay";
124 };
125
126 &ohci {
127 status = "okay";
128 };
129
130 &ethernet {
131 pinctrl-names = "default";
132 pinctrl-0 = <&ephy_pins>;
133
134 mtd-mac-address = <&factory 0x28>;
135
136 mediatek,portmap = "llllw";
137 };
138
139 &wmac {
140 ralink,mtd-eeprom = <&factory 0x0>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&pa_pins>;
143 };
144
145 &pcie {
146 status = "okay";
147 };
148
149 &pcie0 {
150 mt76@0,0 {
151 reg = <0x0000 0 0 0 0>;
152 mediatek,mtd-eeprom = <&factory 0x8000>;
153 ieee80211-freq-limit = <5000000 6000000>;
154 };
155 };
156
157 &state_default {
158 gpio {
159 groups = "i2c", "rgmii1";
160 function = "gpio";
161 };
162 };