target/linux/ramips/dts/mt7620n_buffalo_wmr-300.dts

   1 #include "mt7620n.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "buffalo,wmr-300", "ralink,mt7620n-soc";
   8         model = "Buffalo WMR-300";
   9
  10         aliases {
  11                 led-boot = &led_status;
  12                 led-failsafe = &led_status;
  13                 led-running = &led_status;
  14                 led-upgrade = &led_status;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 aoss1 {
  21                         label = "red:aoss";
  22                         gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 aoss2 {
  26                         label = "green:aoss";
  27                         gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 led_status: status {
  31                         label = "green:status";
  32                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35
  36         keys {
  37                 compatible = "gpio-keys";
  38
  39                 reset {
  40                         label = "reset";
  41                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RESTART>;
  43                 };
  44
  45                 aoss {
  46                         label = "aoss";
  47                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_WPS_BUTTON>;
  49                 };
  50         };
  51 };
  52
  53 &gpio2 {
  54         status = "okay";
  55 };
  56
  57 &spi0 {
  58         status = "okay";
  59
  60         flash@0 {
  61                 compatible = "jedec,spi-nor";
  62                 reg = <0>;
  63                 spi-max-frequency = <10000000>;
  64
  65                 partitions {
  66                         compatible = "fixed-partitions";
  67                         #address-cells = <1>;
  68                         #size-cells = <1>;
  69
  70                         partition@0 {
  71                                 label = "u-boot";
  72                                 reg = <0x0 0x30000>;
  73                                 read-only;
  74                         };
  75
  76                         partition@30000 {
  77                                 label = "u-boot-env";
  78                                 reg = <0x30000 0x10000>;
  79                                 read-only;
  80                         };
  81
  82                         factory: partition@40000 {
  83                                 label = "factory";
  84                                 reg = <0x40000 0x10000>;
  85                                 read-only;
  86                         };
  87
  88                         partition@50000 {
  89                                 compatible = "denx,uimage";
  90                                 label = "firmware";
  91                                 reg = <0x50000 0x7b0000>;
  92                         };
  93                 };
  94         };
  95 };
  96
  97 &ethernet {
  98         mtd-mac-address = <&factory 0x4>;
  99
 100         mediatek,portmap = "wllll";
 101 };
 102
 103 &wmac {
 104         ralink,mtd-eeprom = <&factory 0x0>;
 105 };
 106
 107 &state_default {
 108         default {
 109                 groups = "i2c", "ephy";
 110                 function = "gpio";
 111         };
 112 };