target/linux/ramips/dts/mt7621_lenovo_newifi-d1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
  10         model = "Newifi-D1";
  11
  12         aliases {
  13                 led-boot = &led_blue;
  14                 led-failsafe = &led_blue;
  15                 led-running = &led_blue;
  16                 led-upgrade = &led_blue;
  17                 label-mac-device = &ethernet;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 status-red {
  28                         label = "newifi-d1:red:status";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 status-green {
  33                         label = "newifi-d1:green:status";
  34                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 led_blue: status-blue {
  38                         label = "newifi-d1:blue:status";
  39                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  40                         default-state = "on";
  41                 };
  42         };
  43
  44         keys {
  45                 compatible = "gpio-keys";
  46
  47                 reset {
  48                         label = "reset";
  49                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52         };
  53
  54         gpio_export {
  55                 compatible = "gpio-export";
  56                 #size-cells = <0>;
  57
  58                 usb2power {
  59                         gpio-export,name = "usb2power";
  60                         gpio-export,output = <1>;
  61                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
  62                 };
  63
  64                 usb3power {
  65                         gpio-export,name = "usb3power";
  66                         gpio-export,output = <1>;
  67                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  68                 };
  69         };
  70 };
  71
  72 &sdhci {
  73         status = "okay";
  74 };
  75
  76 &spi0 {
  77         status = "okay";
  78
  79         m25p80@0 {
  80                 compatible = "mx25l25635f", "jedec,spi-nor";
  81                 reg = <0>;
  82                 spi-max-frequency = <25000000>;
  83                 m25p,fast-read;
  84
  85                 partitions {
  86                         compatible = "fixed-partitions";
  87                         #address-cells = <1>;
  88                         #size-cells = <1>;
  89
  90                         partition@0 {
  91                                 label = "u-boot";
  92                                 reg = <0x0 0x30000>;
  93                                 read-only;
  94                         };
  95
  96                         partition@30000 {
  97                                 label = "u-boot-env";
  98                                 reg = <0x30000 0x10000>;
  99                                 read-only;
 100                         };
 101
 102                         factory: partition@40000 {
 103                                 label = "factory";
 104                                 reg = <0x40000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@50000 {
 109                                 compatible = "denx,uimage";
 110                                 label = "firmware";
 111                                 reg = <0x50000 0x1fb0000>;
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &pcie {
 118         status = "okay";
 119 };
 120
 121 &pcie0 {
 122         mt76@0,0 {
 123                 reg = <0x0000 0 0 0 0>;
 124                 mediatek,mtd-eeprom = <&factory 0x8000>;
 125                 ieee80211-freq-limit = <5000000 6000000>;
 126         };
 127 };
 128
 129 &pcie1 {
 130         mt76@0,0 {
 131                 reg = <0x0000 0 0 0 0>;
 132                 mediatek,mtd-eeprom = <&factory 0x0000>;
 133         };
 134 };
 135
 136 &ethernet {
 137         mtd-mac-address = <&factory 0xe000>;
 138 };
 139
 140 &state_default {
 141         gpio {
 142                 ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
 143                 ralink,function = "gpio";
 144         };
 145 };