target/linux/ramips/dts/mt7621_netgear_ex6150.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7621.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "netgear,ex6150", "mediatek,mt7621-soc";
  11         model = "Netgear EX6150";
  12
  13         aliases {
  14                 led-boot = &power_green;
  15                 led-failsafe = &power_amber;
  16                 led-running = &power_green;
  17                 led-upgrade = &power_amber;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,57600";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power_amber: power_amber {
  28                         label = "ex6150:amber:power";
  29                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 power_green: power_green {
  33                         label = "ex6150:green:power";
  34                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 wps {
  38                         label = "ex6150:green:wps";
  39                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 rightarrow {
  43                         label = "ex6150:blue:rightarrow";
  44                         gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 leftarrow {
  48                         label = "ex6150:blue:leftarrow";
  49                         gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 router_green {
  53                         label = "ex6150:green:router";
  54                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy1tpt";
  56                 };
  57
  58                 router_red {
  59                         label = "ex6150:red:router";
  60                         gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 client_green {
  64                         label = "ex6150:green:client";
  65                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  66                         linux,default-trigger = "phy0tpt";
  67                 };
  68
  69                 client_red {
  70                         label = "ex6150:red:client";
  71                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
  72                 };
  73         };
  74
  75         keys {
  76                 compatible = "gpio-keys-polled";
  77                 poll-interval = <20>;
  78
  79                 wps {
  80                         label = "wps";
  81                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_WPS_BUTTON>;
  83                 };
  84
  85                 reset {
  86                         label = "reset";
  87                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  88                         linux,code = <KEY_RESTART>;
  89                 };
  90
  91                 toggle {
  92                         label = "AP/Extender toggle";
  93                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
  94                         linux,code = <BTN_0>;
  95                         /* Active when switch is set to "Access Point" */
  96                 };
  97         };
  98 };
  99
 100 &spi0 {
 101         status = "okay";
 102
 103         flash@0 {
 104                 compatible = "jedec,spi-nor";
 105                 reg = <0>;
 106                 spi-max-frequency = <10000000>;
 107
 108                 partitions {
 109                         compatible = "fixed-partitions";
 110                         #address-cells = <1>;
 111                         #size-cells = <1>;
 112
 113                         partition@0 {
 114                                 label = "u-boot";
 115                                 reg = <0x0 0x30000>;
 116                                 read-only;
 117                         };
 118
 119                         partition@30000 {
 120                                 label = "config";
 121                                 reg = <0x30000 0x10000>;
 122                                 read-only;
 123                         };
 124
 125                         factory: partition@40000 {
 126                                 label = "factory";
 127                                 reg = <0x40000 0x10000>;
 128                                 read-only;
 129                         };
 130
 131                         partition@50000 {
 132                                 compatible = "denx,uimage";
 133                                 label = "firmware";
 134                                 reg = <0x50000 0xe80000>;
 135                         };
 136
 137                         partition@ed0000 {
 138                                 label = "ML1";
 139                                 reg = <0xed0000 0x10000>;
 140                                 read-only;
 141                         };
 142
 143                         partition@ef0000 {
 144                                 label = "ML2";
 145                                 reg = <0xef0000 0x20000>;
 146                                 read-only;
 147                         };
 148
 149                         partition@f10000 {
 150                                 label = "ML3";
 151                                 reg = <0xf10000 0x20000>;
 152                                 read-only;
 153                         };
 154
 155                         partition@f30000 {
 156                                 label = "ML4";
 157                                 reg = <0xf30000 0x20000>;
 158                                 read-only;
 159                         };
 160
 161                         partition@f50000 {
 162                                 label = "ML5";
 163                                 reg = <0xf50000 0x20000>;
 164                                 read-only;
 165                         };
 166
 167                         partition@f70000 {
 168                                 label = "ML6";
 169                                 reg = <0xf70000 0x20000>;
 170                                 read-only;
 171                         };
 172
 173                         partition@f90000 {
 174                                 label = "ML7";
 175                                 reg = <0xf90000 0x20000>;
 176                                 read-only;
 177                         };
 178
 179                         partition@fb0000 {
 180                                 label = "T_Meter1";
 181                                 reg = <0xfb0000 0x10000>;
 182                                 read-only;
 183                         };
 184
 185                         partition@fc0000 {
 186                                 label = "T_Meter2";
 187                                 reg = <0xfc0000 0x10000>;
 188                                 read-only;
 189                         };
 190
 191                         partition@fd0000 {
 192                                 label = "POT";
 193                                 reg = <0xfd0000 0x10000>;
 194                                 read-only;
 195                         };
 196
 197                         partition@fe0000 {
 198                                 label = "board_data";
 199                                 reg = <0xfe0000 0x10000>;
 200                                 read-only;
 201                         };
 202
 203                         partition@ff0000 {
 204                                 label = "nvram";
 205                                 reg = <0xff0000 0x10000>;
 206                                 read-only;
 207                         };
 208                 };
 209         };
 210 };
 211
 212 &pcie {
 213         status = "okay";
 214 };
 215
 216 &pcie0 {
 217         wifi@0,0 {
 218                 reg = <0x0000 0 0 0 0>;
 219                 mediatek,mtd-eeprom = <&factory 0x8000>;
 220                 ieee80211-freq-limit = <5000000 6000000>;
 221         };
 222 };
 223
 224 &pcie1 {
 225         wifi@0,0 {
 226                 reg = <0x0000 0 0 0 0>;
 227                 mediatek,mtd-eeprom = <&factory 0x0000>;
 228                 ieee80211-freq-limit = <2400000 2500000>;
 229         };
 230 };
 231
 232 &ethernet {
 233         mtd-mac-address = <&factory 0x00000004>;
 234 };
 235
 236 &pinctrl {
 237         state_default: pinctrl0 {
 238                 gpio {
 239                         ralink,group = "sdhci", "rgmii2", "jtag";
 240                         ralink,function = "gpio";
 241                 };
 242         };
 243 };