target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "mediatek,mt7621-soc";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16                 label-mac-device = &ethernet;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys";
  25
  26                 wps {
  27                         label = "wps";
  28                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  29                         linux,code = <KEY_WPS_BUTTON>;
  30                 };
  31
  32                 wifi {
  33                         label = "wifi";
  34                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_RFKILL>;
  36                 };
  37
  38                 reset {
  39                         label = "reset";
  40                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_RESTART>;
  42                 };
  43         };
  44
  45         leds {
  46                 compatible = "gpio-leds";
  47
  48                 led_power: power {
  49                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 led_usb: usb {
  53                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  54                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
  55                         linux,default-trigger = "usbport";
  56                 };
  57
  58                 led_internet: internet {
  59                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 led_wifi: wifi {
  63                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  64                         linux,default-trigger = "phy0tpt";
  65                 };
  66
  67                 led_wps: wps {
  68                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  69                 };
  70         };
  71
  72         reg_usb_vbus: regulator {
  73                 compatible = "regulator-fixed";
  74                 regulator-name = "usb_vbus";
  75                 regulator-min-microvolt = <5000000>;
  76                 regulator-max-microvolt = <5000000>;
  77                 gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
  78                 enable-active-high;
  79         };
  80 };
  81
  82 &xhci {
  83         vbus-supply = <&reg_usb_vbus>;
  84 };
  85
  86 &pcie {
  87         status = "okay";
  88 };
  89
  90 &pcie0 {
  91         wifi@0,0 {
  92                 compatible = "mediatek,mt76";
  93                 reg = <0x0 0 0 0 0>;
  94                 mediatek,mtd-eeprom = <&factory 0x8000>;
  95                 ieee80211-freq-limit = <5000000 6000000>;
  96         };
  97 };
  98
  99 &pcie1 {
 100         wifi@0,0 {
 101                 compatible = "mediatek,mt76";
 102                 reg = <0x0 0 0 0 0>;
 103                 mediatek,mtd-eeprom = <&factory 0x0>;
 104                 ieee80211-freq-limit = <2400000 2500000>;
 105         };
 106 };
 107
 108 &ethernet {
 109         mtd-mac-address = <&factory 0x4>;
 110 };
 111
 112 &state_default {
 113         gpio {
 114                 ralink,group = "uart3", "uart2", "jtag", "wdt";
 115                 ralink,function = "gpio";
 116         };
 117 };