ramips: mt7621: add interrupt-controller
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_renkforce_ws-wn530hp3-a.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "renkforce,ws-wn530hp3-a", "mediatek,mt7621-soc";
10 model = "Renkforce WS-WN530HP3-A";
11
12 aliases {
13 label-mac-device = &gmac0;
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 led-running = &led_power;
17 led-upgrade = &led_power;
18 };
19
20 keys {
21 compatible = "gpio-keys";
22
23 reset {
24 label = "reset";
25 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
27 };
28 };
29
30 leds {
31 compatible = "gpio-leds";
32
33 led_power: led_1 {
34 label = "red:led1";
35 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
36 };
37
38 led_2 {
39 label = "blue:led2";
40 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
41 };
42 };
43 };
44
45 &spi0 {
46 status = "okay";
47
48 flash@0 {
49 compatible = "jedec,spi-nor";
50 reg = <0>;
51 spi-max-frequency = <40000000>;
52
53 partitions {
54 compatible = "fixed-partitions";
55 #address-cells = <1>;
56 #size-cells = <1>;
57
58 partition@0 {
59 label = "u-boot";
60 reg = <0x0 0x30000>;
61 read-only;
62 };
63
64 partition@30000 {
65 label = "u-boot-env";
66 reg = <0x30000 0x10000>;
67 read-only;
68 };
69
70 factory: partition@40000 {
71 compatible = "nvmem-cells";
72 label = "factory";
73 reg = <0x40000 0x10000>;
74 #address-cells = <1>;
75 #size-cells = <1>;
76 read-only;
77
78 eeprom_factory_0: eeprom@0 {
79 reg = <0x0 0x400>;
80 };
81
82 eeprom_factory_8000: eeprom@8000 {
83 reg = <0x8000 0x4da8>;
84 };
85
86 macaddr_factory_4: macaddr@4 {
87 reg = <0x4 0x6>;
88 };
89 };
90
91 partition@50000 {
92 compatible = "denx,uimage";
93 label = "firmware";
94 reg = <0x50000 0xf30000>;
95 };
96 };
97 };
98 };
99
100 &pcie {
101 status = "okay";
102 };
103
104 &pcie0 {
105 wifi0: wifi@0,0 {
106 compatible = "mediatek,mt76";
107 reg = <0x0000 0 0 0 0>;
108 nvmem-cells = <&eeprom_factory_0>;
109 nvmem-cell-names = "eeprom";
110 ieee80211-freq-limit = <2400000 2500000>;
111 };
112 };
113
114 &pcie1 {
115 wifi1: wifi@0,0 {
116 compatible = "mediatek,mt76";
117 reg = <0x0000 0 0 0 0>;
118 ieee80211-freq-limit = <5000000 6000000>;
119 nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_4>;
120 nvmem-cell-names = "eeprom", "mac-address";
121 mac-address-increment = <1>;
122 };
123 };
124
125 &gmac0 {
126 nvmem-cells = <&macaddr_factory_4>;
127 nvmem-cell-names = "mac-address";
128 mac-address-increment = <(-2)>;
129 };
130
131 &gmac1 {
132 status = "okay";
133 label = "wan";
134 phy-handle = <&ethphy4>;
135
136 nvmem-cells = <&macaddr_factory_4>;
137 nvmem-cell-names = "mac-address";
138 mac-address-increment = <(-1)>;
139 };
140
141 &mdio {
142 ethphy4: ethernet-phy@4 {
143 reg = <4>;
144 };
145 };
146
147 &switch0 {
148 ports {
149 port@0 {
150 status = "okay";
151 label = "lan2";
152 };
153
154 port@1 {
155 status = "okay";
156 label = "lan1";
157 };
158 };
159 };
160
161 &state_default {
162 gpio {
163 groups = "uart2", "jtag", "wdt";
164 function = "gpio";
165 };
166 };
167
168 &xhci {
169 status = "disabled";
170 };