target/linux/ramips/dts/mt7621_sercomm_na502.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/leds/common.h>
   8
   9 / {
  10         compatible = "sercomm,na502", "mediatek,mt7621-soc";
  11         model = "SERCOMM NA502";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power: power {
  24                         function = LED_FUNCTION_POWER;
  25                         color = <LED_COLOR_ID_GREEN>;
  26                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 internet {
  30                         label = "green:internet";
  31                         gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 wifi {
  35                         label = "green:wifi";
  36                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  37                         linux,default-trigger = "phy0tpt";
  38                 };
  39
  40                 zwave {
  41                         label = "green:zwave";
  42                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 service {
  46                         label = "green:service";
  47                         gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 zigbee {
  51                         label = "green:zigbee";
  52                         gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 bluetooth {
  56                         function = LED_FUNCTION_BLUETOOTH;
  57                         color = <LED_COLOR_ID_GREEN>;
  58                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61
  62         keys {
  63                 compatible = "gpio-keys";
  64
  65                 reset {
  66                         label = "reset";
  67                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_RESTART>;
  69                 };
  70
  71                 select {
  72                         label = "select";
  73                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  74                         linux,code = <BTN_0>;
  75                 };
  76
  77                 sync {
  78                         label = "sync";
  79                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  80                         linux,code = <KEY_RFKILL>;
  81                 };
  82         };
  83
  84         gpio-export {
  85                 compatible = "gpio-export";
  86
  87                 zwave_reset {
  88                         gpio-export,name = "zwave_reset";
  89                         gpio-export,output = <1>;
  90                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  91                 };
  92
  93                 zigbee_reset {
  94                         gpio-export,name = "zigbee_reset";
  95                         gpio-export,output = <1>;
  96                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  97                 };
  98         };
  99 };
 100
 101 &ethernet {
 102         pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
 103 };
 104
 105 &gmac0 {
 106         nvmem-cells = <&macaddr_factory_e000 0>;
 107         nvmem-cell-names = "mac-address";
 108 };
 109
 110 &nand {
 111         status = "okay";
 112
 113         partitions {
 114                 compatible = "fixed-partitions";
 115                 #address-cells = <1>;
 116                 #size-cells = <1>;
 117
 118                 partition@0 {
 119                         label = "u-boot";
 120                         reg = <0x0 0x80000>;
 121                         read-only;
 122                 };
 123
 124                 partition@80000 {
 125                         label = "config";
 126                         reg = <0x80000 0x80000>;
 127                         read-only;
 128                 };
 129
 130                 partition@100000 {
 131                         label = "factory";
 132                         reg = <0x100000 0x40000>;
 133
 134                         nvmem-layout {
 135                                 compatible = "fixed-layout";
 136                                 #address-cells = <1>;
 137                                 #size-cells = <1>;
 138
 139                                 eeprom_factory_0: eeprom@0 {
 140                                         reg = <0x0 0x400>;
 141                                 };
 142
 143                                 eeprom_factory_8000: eeprom@8000 {
 144                                         reg = <0x8000 0x200>;
 145                                 };
 146
 147                                 macaddr_factory_e000: macaddr@e000 {
 148                                         compatible = "mac-base";
 149                                         reg = <0xe000 0x6>;
 150                                         #nvmem-cell-cells = <1>;
 151                                 };
 152                         };
 153                 };
 154
 155                 partition@140000 {
 156                         label = "kernel1";
 157                         reg = <0x140000 0x1400000>;
 158                 };
 159
 160                 partition@1540000 {
 161                         label = "kernel";
 162                         reg = <0x1540000 0x400000>;
 163                 };
 164
 165                 partition@1940000 {
 166                         label = "ubi";
 167                         reg = <0x1940000 0x1000000>;
 168                 };
 169
 170                 partition@2940000 {
 171                         label = "user_storage";
 172                         reg = <0x2940000 0x100000>;
 173                 };
 174
 175                 partition@2a40000 {
 176                         label = "data";
 177                         reg = <0x2a40000 0x1000000>;
 178                 };
 179
 180                 partition@3a40000 {
 181                         label = "storage";
 182                         reg = <0x3a40000 0x3200000>;
 183                 };
 184
 185                 partition@6c40000 {
 186                         label = "backup";
 187                         reg = <0x6c40000 0x1340000>;
 188                 };
 189         };
 190 };
 191
 192 &pcie {
 193         status = "okay";
 194 };
 195
 196 &pcie0 {
 197         wifi@0,0 {
 198                 compatible = "mediatek,mt76";
 199                 reg = <0x0000 0 0 0 0>;
 200                 nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_e000 1>;
 201                 nvmem-cell-names = "eeprom", "mac-address";
 202                 ieee80211-freq-limit = <5000000 6000000>;
 203         };
 204 };
 205
 206 &pcie1 {
 207         wifi@0,0 {
 208                 compatible = "mediatek,mt76";
 209                 reg = <0x0 0 0 0 0>;
 210                 nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_e000 2>;
 211                 nvmem-cell-names = "eeprom", "mac-address";
 212                 ieee80211-freq-limit = <2400000 2500000>;
 213         };
 214 };
 215
 216 &state_default {
 217         gpio {
 218                 groups = "jtag", "rgmii2";
 219                 function = "gpio";
 220         };
 221 };
 222
 223 &switch0 {
 224         ports {
 225                 port@4 {
 226                         status = "okay";
 227                         label = "lan";
 228                 };
 229         };
 230 };
 231
 232 &uartlite2 {
 233         status = "okay";
 234 };
 235
 236 &uartlite3 {
 237         status = "okay";
 238 };